Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Add an HA Cluster Interface

You are here: Device Administration > Cluster Configuration.

To add an HA cluster interface:

  1. Click + on the upper right side of the Cluster Configuration page.

    The Add HA Cluster Interface page appears.

  2. Complete the configuration according to the guidelines provided in Table 1.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Add HA Cluster Interface Page

Field

Action
Fabric Link
Fabric Link 0 (fab0)

Interface

Enter the interface IP address for fabric link 0 and click + to add it.

Select an existing interface and click X to delete the interface.
Fabric Link 1 (fab1)

Interface

Enter the interface IP address for fabric link 1 and click + to add it.

Select an existing interface and click X to delete the interface.
Redundant Ethernet

Interface

Enter the logical interface. This specifies a logical interface consisting of two physical Ethernet interfaces, one on each chassis.

IP

Enter redundant Ethernet IP address.

Redundancy Group

Select one of the redundancy group from the list. Else, enter a redundancy group.

lacp

Select an option from list:

  • active—Initiate transmission of LACP packets.

  • passive—Respond to LACP packets.

periodic

Select an option from list for periodic transmission of LACP packets. The options are fast or slow.

+

Click + to add the redundant Ethernet configuration.

X

Select one or more existing redundant Ethernet configurations and click X to delete it.

Related Documentation