Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Add a Destination Rule Set

You are here: Network > NAT > Destination.

To add a destination Rule Set:

  1. Click the add icon (+) on the upper right side of the Destination page.

    The Add Rule Set page appears.

  2. Complete the configuration according to the guidelines provided in Table 1.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 1 describes the fields on the Add Rule Set page.

Table 1: Fields on the Add Rule Set page.

Field

Action
Add Rule Set

Rule Set Name

Enter the rule set name.

Rule Set Description

Enter a description for the rule set.
From

Specifies the filter options. Select an option:

  • Routing Instance

  • Zone

  • Interface

Select the routing instances/zones/interfaces in the Available column and the use the right arrow to move them to the Selected column.
Add Rule

Rule Name

Enter the rule name.

Rule Description

Enter a description for the rule.
Match

Source Address

Search and select the source addresses in the Available column and the use the right arrow to move them to the Selected column.

You can also enter a source address in the New text box in the Selected column and click Add to add the source address to the lower pane of the Selected column.

Destination Address

Enter the destination IP address.

Port

Enter the destination port number.

IP Protocol

Enter the protocol name in the text box and click + to add the protocol to the IP Protocol column.
Actions

Specifies the actions for the destination NAT pool. Select an option:

  • No Destination NAT.

  • Do Destination NAT With Pool.
Do Destination NAT With Pool

Add New Pool

Select a pool from the list or click +.
Add Destination Pool

Pool Name

Enter the destination pool name.

Pool Description

Enter a description for the destination pool.

Routing Instance

Specifies the routing instance available.

Select an option.
Pool Addresses and Port

Address/Port

Enter the destination pool address.

Port

Enter the destination pool port number.

Address Range

Enter the destination pool address range.

Upper Threshold

Enter upper threshold at which an SNMP trap is triggered. Session count hit alarm range: 1 through 4294967295

Lower Threshold

Enter lower threshold at which an SNMP trap is triggered. Rule session count alarm range: 1 through 4294967295

Related Documentation