Add a Scheduler

You are here: Network > Class of Service(CoS) > Schedulers.

To add a scheduler:

Click + available on the upper-right corner of the Scheduler page.

The Add Scheduler page appears.
Complete the configuration according to the guidelines provided in Table 1.
Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 1: Fields on the Add Scheduler Page
Field	Action
Scheduler name	Enter the scheduler name.
Scheduler priority	Select an option from the list: high—Packets in this queue have high priority. low—Packets in this queue are transmitted last. medium-low—Packets in this queue have medium-low priority. medium-high—Packets in this queue have medium-high priority. strict-high—Packets in this queue are transmitted first.
Buffer size	Select an option from the list: exact—Exact buffer size. percent—Percentage of the total buffer. Select and type an integer from 1 through 100. remainder—Remaining available buffer size. temporal—Temporal value in microseconds.
Shaping rate	Enter the minimum bandwidth allocated to a queue. Select an option from the list: rate—Shaping rate as an absolute number of bits per second. Select and type an integer from 3200 through 160,000,000,000 bits per second. percent—Shaping rate as a percentage. Select and type an integer from 0 through 100.
Transmit rate	Enter the transmission rate of a scheduler. Select an option from the list: rate—Transmit rate. Select and type an integer from 3200 through 160,000,000,000 bits per second. exact—Exact transmit rate. percent—Percentage of transmission capacity. Select and type an integer from 1 through 100. remainder—Remaining transmission capacity.