Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Add an ICAP Redirect Profile

You are here: Security Services > ICAP Redirect.

To add an ICAP redirect profile:

Click + on the upper-right corner of the ICAP Redirect Profiles page.

The Create ICAP Redirect Profile page appears.
Complete the configuration according to the guidelines provided in Table 1.
Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 1: Fields on the Create ICAP Redirect Profile Page
Field	Action
Name	Enter a unique ICAP Service profile name. The string must contain alphanumeric characters, colons, periods, dashes, and underscores. No spaces are allowed; maximum length is 63 characters.
Timeout	Enter the server response timeout in milliseconds. The range is between 100 milliseconds to 50000 milliseconds.
HTTP Redirect Option
Request	Select to enable redirect service on HTTP request.
Response	Select to enable redirect service on HTTP response.
ICAP Server You can configure ICAP Redirection server by the following options: Add—Create an ICAP Redirect server. Enter information as specified in Table 2. Edit—Edit an ICAP Redirect server configuration. Enter information as specified in Table 2.
Fallback Option
Timeout Action	Select the timeout action from the list. The available options are: None, Permit, Log Permit, and Block.
Connectivity Action	Select the connectivity action from the list that the request cannot be sent out due to connection issues.
Default Action	Select a default action from the list to be taken when there are scenarios other than the above two mentioned ones.

Table 2: Fields on the Create ICAP Redirect Server Page
Field	Action
Name	Enter an ICAP Redirect server name. The string must contain alphanumeric characters, colons, periods, dashes, and underscores. No spaces are allowed; maximum length is 63 characters.
Host Type*	Select Name or IP address.
Host	Enter the host name or host IP address depending on what host type you choose.
Port	Specifies the port in the server. This is the server listening post and the default port will be reached according to protocol defined. Enter the port number. The range is 1025 through 65534.
Sockets	Specifies the number of connections to be created. Enter the number of connections. The range is 1 through 64.
Authentication
Authorization Type	Specifies the type of authentication.
Credentials Type	Select the credential type as ASCII or Base64. Based on the Credential Type that you choose, enter the ASCII string or Base64 string.
URL
Request MOD	Enter the reqmod uri that can be configured for ICAP server only.
Response MOD	Enter the respmod uri that can be configured for ICAP server only.
Routing Instance	Specifies the virtual router that is used for launching. Select a routing instance from the list.
SSL Initiation Profile	Select an SSL initiation profile from the list.