Enroll Your Device with Juniper ATP Cloud

Before enrolling a device:

Ensure that you have a Juniper ATP Cloud account with an associated license (free, basic, or premium) to configure a Juniper ATP Cloud realm. The license controls the features of the Juniper ATP Cloud. For more information on the Juniper ATP Cloud account, see Register a Juniper Advanced Threat Prevention Cloud Account.
Decide which region the realm you create will cover because you must select a region when you configure a realm.
Ensure the device is registered in the Juniper ATP Cloud Web portal.
In the CLI mode, configure set security forwarding-process enhanced-services-mode on your SRX300, SRX320, SRX340, SRX345, and SRX550M devices to open ports and get the device ready to communicate with Juniper ATP Cloud.
Juniper ATP Cloud requires that both your Routing Engine (control plane) and Packet Forwarding Engine (data plane) can connect to the Internet.
Juniper ATP Cloud requires the following TCP ports to be open on the SRX Series Firewall: 80, 8080, and 443.

You are here: Device Administration > ATP Management > Enrollment.

Use this page to enroll your SRX Series Firewall with Juniper Advanced Threat Prevention Cloud (Juniper ATP Cloud).

Juniper ATP Cloud is a cloud-based threat identification and prevention solution. It protects your device from malware and sophisticated cyber threats by inspecting e-mail and web traffic for advanced threats. Juniper ATP Cloud integrates with the SRX Series Firewalls to simplify its deployment and enhance the anti-threat capabilities of the SRX Series Firewall.

ATP uses a Junos OS operation (op) script to help you configure your SRX Series Firewall to connect to the Juniper ATP Cloud service.

The Junos OS operation (op) script performs the following tasks:

Downloads and installs certificate authority (CAs) licenses onto your SRX Series Firewall.
Creates local certificates and enrolls them with the cloud server.
Performs basic Juniper ATP Cloud configuration on the SRX Series Firewall.
Establishes a secure connection to the cloud server.

To enroll your device with Juniper ATP Cloud from J-Web:

Proxy Profile Configuration (Optional)

Select an option in the Proxy Profile list and proceed with Step 2.
Note:
- The list displays the existing proxy profiles that you have created using the Proxy Profile page (Security Policies & Objects > Proxy Profiles).
- The SRX Series Firewall and Juniper ATP Cloud communicates through the proxy server if a proxy profile is configured. Otherwise, they directly communicate with each other.
Or click Create Proxy to create a proxy profile.

The Create Proxy Profile page appears.
Complete the configuration by using the guidelines in Table 1.
Click OK.

A new proxy profile is created.
Click Apply Proxy.

Applying proxy enables the SRX Series Firewall and Juniper ATP Cloud to communicate through the proxy server.

Table 1: Fields on the Create Proxy Profile Page
Field	Action
Profile Name	Enter a name for the proxy profile.
Connection Type	Select the connection type server from the list that proxy profile uses: Server IP—Enter the IP address of the proxy server. Host Name—Enter the name of the proxy server.
Port Number	Select a port number for the proxy profile. Range is 0 to 65535.

Enroll SRX Series Firewall with Juniper ATP Cloud

Click Enroll.

The The Enroll window appears.

Note:
If there are any existing configuration changes, a message appears for you to commit the changes and then to proceed with the enrollment process.
Complete the configuration by using the guidelines in Table 2.
Click OK.

The SRX Series Firewall enrollment progress, successful message, or any errors will be shown at the end of the Enroll page.
Note:
- A new realm is created if you have enabled Create New Realm and then the SRX Series Firewall is enrolled to Juniper ATP Cloud. If there is any existing enrollment for the same SRX Series Firewall, CLI sends the data to Juniper ATP Cloud portal to do the duplicate validation during the enrollment process. You cannot check for the duplicate validation through J-Web.
- Click Diagnostics to troubleshoot any enrollment errors.
- Click UnEnroll if you wish to disenroll your device from ATP

Table 2: Fields on the ATP Cloud Enrollment Page
Field	Description
Create New Realm	By default, this option will be disabled if you have an ATP Cloud account with an associated license. Enable this option to add a new realm if you do not have an ATP Cloud account with an associated license.
Location	Select a region of the world from the list.
Email	Enter your E-mail address.
Password	Enter a unique string at least eight characters long. It must include both uppercase letters, lowercase letters, and at least one number. It can also include special characters. No spaces are allowed and you cannot use the same sequence of characters that are in your e-mail address.
Confirm Password	Reenter the password.
Company Name	Enter a company name to enroll into the realm. A company name can only contain alphanumeric characters, special characters (underscore and dash).
Realm	Enter a name for the security realm. This should be a name that is meaningful to your organization. A realm name can only contain alphanumeric characters and the dash symbol. Once created, this name cannot be changed.