Monitor System Alarm
About System Alarm Page
You are here: Device Administration > Alarm Management > System Alarm.
You can enable system login alarm login classes. The configured Login Classes will display system alarms while logging in.
Create System Alarm Configuration
To create System Alarm Configuration:
- Enter the information specified in Table 1 to create
System Alarm Configuration.
Table 1: RPM Information Troubleshooting Options Field Function Currently Running Tests Graph
Click the Graph link to display the graph (if it is not already displayed) or to update the graph for a particular test.
Owner
Configured owner name of the RPM test.
Test Name
Configured name of the RPM test.
Probe Type
Type of RPM probe configured for the specified test. Following are valid probe types:
http-get
http-get-metadata
icmp-ping
icmp-ping-timestamp
tcp-ping
udp-ping
Target Address
IP address or URL of the remote server that is being probed by the RPM test.
Source Address
Explicitly configured source address that is included in the probe packet headers.
If no source address is configured, the RPM probe packets use the outgoing interface as the source address, and the Source Address field is empty.
Minimum RTT
Shortest round-trip time from the J Series device to the remote server, as measured over the course of the test.
Maximum RTT
Longest round-trip time from the J Series device to the remote server, as measured over the course of the test.
Average RTT
Average round-trip time from the J Series device to the remote server, as measured over the course of the test.
Standard Deviation RTT
Standard deviation of round-trip times from the J Series device to the remote server, as measured over the course of the test.
Probes Sent
Total number of probes sent over the course of the test.
Loss Percentage
Percentage of probes sent for which a response was not received.
Round-Trip Time for a Probe Samples
Total number of probes used for the data set.
The J Series device maintains records of the most recent 50 probes for each configured test. These 50 probes are used to generate RPM statistics for a particular test.
Earliest Sample
System time when the first probe in the sample was received.
Latest Sample
System time when the last probe in the sample was received.
Mean Value
Average round-trip time for the 50-probe sample.
Standard Deviation
Standard deviation of the round-trip times for the 50-probe sample.
Lowest Value
Shortest round-trip time from the device to the remote server, as measured over the 50-probe sample.
Time of Lowest Sample
System time when the lowest value in the 50-probe sample was received.
Highest Value
Longest round-trip time from the J Series device to the remote server, as measured over the 50-probe sample.
Time of Highest Sample
System time when the highest value in the 50-probe sample was received.
Cumulative Jitter for a Probe Samples
Total number of probes used for the data set.
The J Series device maintains records of the most recent 50 probes for each configured test. These 50 probes are used to generate RPM statistics for a particular test.
Earliest Sample
System time when the first probe in the sample was received.
Latest Sample
System time when the last probe in the sample was received.
Mean Value
Average jitter for the 50-probe sample.
Standard Deviation
Standard deviation of the jitter values for the 50-probe sample.
Lowest Value
Smallest jitter value, as measured over the 50-probe sample.
Time of Lowest Sample
System time when the lowest value in the 50-probe sample was received.
Highest Value
Highest jitter value, as measured over the 50-probe sample.
Time of Highest Sample
System time when the highest jitter value in the 50-probe sample was received.
- Click OK to create System Alarm Configuration.
System Alarm Configuration page appears.
- Click Cancel to cancel your entries and returns to the System Alarm Configuration page.
Edit System Alarm Configuration
To edit System Alarm Configuration:
-
Click the pencil icon available on the upper-right corner of the System
Alarm Configuration page.
See Table 1 for the options available for editing the System Alarm Configuration page.
- Click OK.