About the Cluster Configuration Page

You are here: Device Administration > Cluster Configuration.

Use this page to add, edit, or delete chassis cluster configuration.

Tasks You Can Perform

You can perform the following tasks from this page:

Table 1 and Table 2 describes the fields on the Cluster Configuration page.

Table 1: Fields on the Node Settings Page
Field	Description
Node ID	Displays the node ID.
Cluster ID	Displays the cluster ID configured for the node.
Host Name	Displays the name of the node.
Backup Router	Displays the IP address used while booting.
Management Interface	Displays the management interface of the node.
IP Address	Displays the management IP address of the node.
Status	Displays the state of the redundancy group. Primary–Redundancy group is active. Secondary–Redundancy group is passive.

Table 2: Fields on the HA Cluster Settings Page
Field	Action
Interfaces
Global Settings	To configure the global settings: Click Global Settings at the upper-right corner of the Interfaces table. The Global Settings window appears. Enter the number of redundant Ethernet (reth) interfaces allowed. Range is 1 through 128. Click OK to save the changes. If you want to discard your changes, click Cancel.
Name	Displays the physical interface name.
Member Interfaces/IP Address	Displays the member interface name or IP address configured for an interface.
Redundancy Group	Displays the redundancy group.
Redundancy Group
Group	Displays the redundancy group identification number.
Preempt	Displays the selected Preempt option. True–Primary role can be preempted based on priority. False–Primary role cannot be preempt based on priority.
Gratuitous ARP Count	Displays the number of gratuitous ARP requests that a newly elected primary device in a chassis cluster sends out to announce its presence to the other network devices.
Node Priority	Displays the assigned priority for the redundancy group on that node. The eligible node with the highest priority is elected as primary for the redundant group.