Subscription Requirements for Marvis Actions

Subscription Types

Your Marvis subscriptions determine the actions that you'll see on the Actions dashboard. Be aware of the requirements for the types of subscription and purchase the subscriptions that you need for your network.

Different Marvis subscriptions enable different Marvis actions. For example, you need a Marvis for Wired subscription to see Wired actions. The actions for each type of subscription are shown in the tables in the section of this topic.

Note:

If you are using a trial subscription type, you can view all Marvis Actions until the trial subscription ends.

Available Actions for Your Subscriptions

Available actions vary for different subscriptions, as appropriate for the types of devices that are associated with these subscriptions. The following tables show the available actions for each subscription type.

Table 1: Marvis for Wired Actions

Category	Marvis for Wired Actions
Connectivity	Authentication Failure
	DHCP Failure
Switch	Negotiation Incomplete
	MTU Mismatch
	Loop Detected
	Network Port Flap
	High CPU
	Port Stuck
	Traffic Anomaly
Other Actions	Persistently Failing Clients
	Access Port Flap

Table 2: Marvis for WAN Actions

Category	Marvis for WAN Actions
WAN Edge	MTU Mismatch
	Bad WAN Uplink
	VPN Path Down
	Non-Compliant

Table 3: Marvis for Wireless Actions

Category	Marvis for Wireless Actions
Layer 1	Bad Cable
Connectivity	Authentication Failure
	DHCP Failure
	ARP Failure
	DNS Failure
AP	Offline
	Health Check Failed
	Non-compliant
	Coverage Hole
	Insufficient Capacity
	AP Loop Detected
Switch	Missing VLAN
Other Actions	Persistently Failing Clients