Generate a PCI Report

date_range 01-Apr-25

If your access points (APs) handle cardholder data, you can run a report to check for compliance with the Payment Card Industry Data Security Standard (PCI DSS).

Before you run a PCI DSS report for a site, ensure that all of the site's access points (APs) are in the Connected state. If APs are in the Disconnected state, the appendix section of the report will display a message indicating that the AP’s firmware could not be determined.

How to generate a PCI report:

From the left menu, select Site > Wireless > Security.
At the top of the Security page, click Generate PCI Report.
Follow the on-screen prompts to complete the sections of the pop-up window.
- Included Sites—Select the sites or site groups to include. Then click Next.
- SSIDs Transmitting Cardholder Data—Select the WLANs and specify the VLANs that move cardholder data. Then click Next. You must enter at least one VLAN ID to see the Next button for this section.
When you see confirmation that all sections are complete, click the Generate PCI Report button.
When the View Report link appears, click it to read the report.

Tip: You can use the printer button to send the report to your printer or PDF maker.
Click Close to return to the Security page.

arrow_backward PREVIOUS PCI DSS Compliance

NEXT arrow_forward WxLAN Access Policies

English

keyboard_arrow_right

Juniper Mist Wireless Assurance Configuration Guide

Generate a PCI Report

Stay in touch