Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring Settings for Custom Feeds

Use the Settings page to specify the number of days for the custom feed to be active and expire once the duration is crossed. Also, specify how often the feeds must be updated.

In the ATO Cloud with Juniper Connected Security, Clouds feed only, and No ATO Cloud modes, you can configure the Time To Live (TTL) settings for dynamic address, allowlist, blocklist, infected host, DDoS, and C&C Server feed types. In the ATO Cloud mode, you can configure TTL settings for only dynamic address, allowlist, blocklist, and C&C Server feed types.

Note:

When you configure a TTL setting for a particular feed type, the configuration is applicable for all the custom feeds belonging to that particular feed type. For example, if you set TTL for Allowlist feed type to 45 days, then all Allowlist feeds will have the same configuration.

To configure Settings:

  1. Select Configure>Threat Prevention>Feed Source.

    The Feed Sources page appears.

  2. In the Custom Feeds tab, select Settings.

    The Settings page appears.

  3. Complete the configuration by using the guidelines in Table 1.
  4. Click Update.

    The settings are updated and a success message is shown that the Settings are updated successfully.

    At the beginning of the Settings page, the last updated settings information is shown. This message is refreshed whenever you update the setting.

Table 1: Fields on the Settings Page

Option

Description

Time to live

Select one of the following options:

  • Specify manually—Select this option to specify the number of days for the required custom feed type to be active.

    • Expires in (days)—Enter the number of days for the required custom feed to be active. Default value is 30 days. The available range is 1 to 365 days.

      The number of days that you configure in this field appears in the Days to Become Inactive field on the Custom Feeds page. If you make any changes to this field, the same information is refreshed in the Days to Become Inactive field and the timer is adjusted to the updated value.

  • Never Expire—Select this option if you do not want any custom feed type to be inactive or expire.

Update Interval

Specify how often each feed type must be updated.

By default, all feeds are updated every 5 minutes.

Valid range is 1 through 5 minutes.

Related Documentation