Using Generated Alerts
Before You Begin
Read the Alerts and Alarms Overview topic.
Review the Generated Alerts main page for an understanding of existing generated alarms. See Alert Definitions Main Page Fields for field descriptions.
You must add the following configuration to the managed SRX Series Firewalls:
set snmp trap-group sdfm version all set snmp trap-group sdfm destination-port 10164 set snmp trap-group sdfm categories authentication set snmp trap-group sdfm categories chassis set snmp trap-group sdfm categories link set snmp trap-group sdfm categories routing set snmp trap-group sdfm categories startup set snmp trap-group sdfm categories rmon-alarm set snmp trap-group sdfm categories vrrp-events set snmp trap-group sdfm categories configuration set snmp trap-group sdfm categories services set snmp trap-group sdfm categories chassis-cluster set snmp trap-group sdfm categories sonet-alarms set snmp trap-group sdfm targets x.x.x.x (eth0 IP of space)
Use the Generated Alerts page to view the system event‐based alerts in response to a configured alert definition. The generated alerts help you to identify problems that appear in your monitored network environment. You can view statistics such as the number of critical and non‐critical alerts.
To use the Generated Alerts page:
- Select Monitor > Alerts & Alarms > Alerts. The Alerts page appears.
- Use the guidelines provided in Table 1 to learn about the page.
Action |
Guidelines |
---|---|
Jump to Event Viewer |
Select the generated alert and then right‐click or click More > Jump to Events and Logs. The corresponding events that triggered the alert are displayed. |
Detail View |
Select the generated alert and then right-click or click More > Detail View. |
Clear All Selections |
Select the generated alert and then right-click or click More > Clear All Selections. |