Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

BGP Live Status Check

The BGP Live Status Check window displays the current BGP peering’s operational status in real time via SNMP collection. It is accessed by right-clicking on the BGP Map and selecting Live Status Check. Select the desired Node Peers using the checkboxes and press Start to begin the SNMP collection.

Figure 1: BGP Live Status CheckBGP Live Status Check
  • Status returns the value from MIB OID bgpPeerState: idle, connect, active, opensent, openconfirm, or established. Established is the key state which indicates peers are operationally up and BGP route updates are freely exchanged. BGP Peering Operation Status = Up only if peering state = Established. Any other peering state collected (idle, connect, active, opensent, or openconfirm) implies BGP Peering Operational Status = Down.

  • bgpPeerFsmEstablishedTime indicates how long this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.

  • LastUpdated is the last collection time.