Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Add Anuta ATOM as an External EMS Application

Before you add ATOM as an External EMS application in Paragon Automation, ensure that you have an account created in ATOM and Paragon Automation is registered as a client in Keycloak. To add the ATOM as an external EMS application to Paragon Automation, you need to provide:

  • The credentials for accessing ATOM.

    This is the username and password set after the ATOM installation, for logging into the ATOM UI. These credentials must be configured in Paragon Automation so that the components in Paragon Automation can interwork with ATOM.

  • The client ID and client secret provided by Keycloak when Paragon Automation is registered with Keycloak.

To add ATOM to Paragon Automation as an external EMS application:

  1. Click Administration > External EMS in the left navigation menu.

    The External EMS page appears.

  2. Enter values referring to Table 1.
  3. Click OK.

    A message indicating whether the External EMS application was successfully added or not is displayed. The External EMS application is listed on the External EMS page if the operation is successful.

Table 1 lists the fields to be configured on the Add External EMS page.

Table 1: Fields on the Add External EMS Page

Field

Description

Type

Select ATOM from the list.

Server Address

Enter the IPv4 address to access the ATOM UI.

For a non-high availability (non-HA) setup or a high availability (HA) setup, enter the IPv4 address that was configured for the ATOM primary node.

For example: 192.168.51.55

Username

Enter admin as the username to log in to ATOM.

Password

Enter the password to log in to ATOM.

Note:

The username and password are configured after ATOM installation.

Parameters

Add parameters, such as client ID and client secret, for connecting with the External EMS application.

To add the parameters, click the Add icon (+) provided in the Parameters field and enter the parameter and corresponding value in the text fields that appear. Add more parameters by clicking the Add (+) icon.

Some of the parameters that you should configure for adding ATOM as an external EMS application are:
Note:

After adding ATOM as an External EMS to Paragon Automation, ensure that you obtain relevant use case packages required for the Paragon-ATOM integrated Automation solution and install them in ATOM. For information about the packages to be installed for a solution and to access the packages, contact support@anutanetworks.com.

Related Documentation