Add a Node
You can add customer edge nodes, provider edge nodes, and nodes representing Test Agents [Paragon Active Assurance (PAA) agents] and sites (multiple nodes in one location) in the Node tab of the topology page.
To add a new node to your network:
Field |
Descriptions |
---|---|
Properties |
|
Name |
Enter a unique name for the node. |
Longitude |
Enter the longitude value of the node. Longitudes range from -180 to 180. Note:
|
Latitude |
Enter the latitude value of the node. Latitudes range from -90 to 90. Note:
|
Site |
Enter the geographical site to which the node belongs, if any. You can use specification of a geo-site to group tagged nodes in the UI. |
Role |
Select one of the following IP roles for the node:
|
Node Type |
Select either CE or Site. This selection depends on your network topology. In some networks, the termination is on a CE node. In others, the termination is on a network beyond the CE, which would be considered a site. |
Advanced |
|
Description |
Enter a description for the node. |
Slices |
Enter one or more IDs of the network slices to which you want to assign the node. Range is 1 through 2^64 (18,446,744,073,709,551,615). The network slice IDs are also referred to as topology slice IDs. |
Custom Attributes |
Simple name-value pairs which can be used to add any arbitrary customer-specific information. For example, to differentiate between properties for different vendor nodes. To add custom properties associated with the node:
Note:
|