View Inventory Reports
Paragon Automation enables you to generate and view Inventory reports that provide details of the hardware inventory in the network. For information on the types of Inventory reports and how to generate them, see Inventory Reports Overview.
To access the page for to a specific Inventory report, select Reports > Inventory > Report-Name.
You can perform the following actions on this page:
View the following Inventory reports:
Download a report—Hover over the Download button on the top-right corner of the report and select either CSV or JSON to download the report as a comma-separated values file (CSV) or JavaScript Object Notation (JSON) file, respectively.
Show or hide columns in a report—Click the vertical ellipsis icon at the top-right corner of the report and select the columns that you want displayed in the report.
Only the columns that you selected are displayed.
Table 1 explains the fields displayed in the Devices report.
Field |
Description |
---|---|
Device Name |
Name of the device present in the network. |
Vendor |
Name of the device vendor. Example: Juniper |
IP Address |
IPv4 address of the device. |
Source |
Filename of the configuration file from where the device details are collected. |
System Name |
System name for the device. |
Description |
Description for the device. |
Contact |
Contact name for the device. |
Location |
Physical location of the device. |
Last update by CLI |
Date (in MM:DD:YYYY format) and time (in HH:MM:SS 12-hour or AM/PM format) at which the configuration file was last updated as a result of device collection. |
Chassis Type |
Type of chassis. Example: WS-C6509-E |
Hardware Version |
Hardware revision model of the chassis. |
Hardware ID |
Serial number of the chassis. |
ROM Version |
ROM monitor version. |
ROM System Version |
ROM system software version. |
Configuration Register |
SNMP configuration register value. |
Memory |
RAM (in bytes) available to the CPU. |
Configuration Memory |
Non-volatile configuration memory available, in bytes. |
Configuration Memory In Use |
Non-volatile configuration memory used, in bytes. |
Boot Image |
Information related to the boot image. Example: a string starting with flash:, bootflash:, disk0: |
Processor |
Processor used in the device. Example: PowerPC405 |
OS Version |
Version of OS that is currently installed on the device. |
Management IP Address |
Management IP Address that is used by Paragon Planner to discover the device. |
Model |
Additional details not known from the vendor, for example, by distinguishing JUNIPER and JUNIPER_EX. |
OS Family |
OS family to which the device belongs. Example: JUNOS |
Last Update by SNMP |
Date (in MM:DD:YYYY format) and time (in HH:MM:SS 12-hour or AM/PM format) at which the configuration file was last updated as a result of SNMP collection. |
Hostname |
Hostname of the device. |
IPv6 |
IPv6 address of the device, if any. |
AS |
Autonomous system (AS) number assigned to the device. |
Table 2 explains the fields displayed in the Device Parts report.
Field |
Description |
---|---|
Name |
Name of the device part. |
Device Name |
Name of the device to which this part belongs. |
Vendor |
Name of the device vendor. Example: Juniper |
IP Address |
IP address of the device to which the part belongs. |
Part |
Part number associated with the device part. |
Serial Number |
Serial number of the device part. |
Description |
Description for the device part. |
Estimated Cost |
Estimated cost of the device part. |
Hostname |
Hostname of the device. |
AS |
AS number assigned to the device. |
Model |
Additional details not known from the vendor, for example, by distinguishing JUNIPER and JUNIPER_EX. |
Card ID |
Location of the card on the device. Example: S-0/1 |
Table 3 explains the fields displayed in the Line Cards report.
Field |
Description |
---|---|
Card Name |
Name of the line card. For example: WS-X6704-10GE |
Device Name |
Name of the device to which this part belongs. |
Vendor |
Name of the device vendor. Example: Juniper |
IP Address |
The IP address of the device to which the part belongs. |
Card ID |
Location of the card on the device. Example: S-0/1 |
Connected Ports |
Sum of the number of ports that meet one or more of the following conditions:
|
Reserved Ports |
Number of reserved ports in the line card. A port is considered reserved if the interface description in the configuration file contains one or more of the following keywords:
|
Shutdown Ports |
Number of ports that have operational status or administrative status as Down. |
Port Count |
Number of ports on the line card. |
Part |
Part number of the line card. |
Serial number |
Serial number of the line card. |
FRU Line Cards |
Name of the field-replaceable unit (FRU) line card (applicable only to Cisco devices). |
FRU Route Memory |
Route memory allocated to the FRU (applicable only to Cisco devices). |
FRU Packet Memory |
Packet memory allocated to the FRU (applicable only to Cisco devices). |
L3 Engine Type |
Type of L3 Engine (applicable only to Cisco devices). |
L3 Engine |
Details related to the L3 engine (applicable only to Cisco devices). |
TAN |
Top Assembly Number (TAN) or ordering number (applicable only to Cisco devices). |
Description |
Description for the line card. |
Controller Memory |
Controller memory (applicable only to Cisco devices). |
Estimated Cost |
Estimated cost of the line card. |
Management IP Address |
Management IP Address that is used by Paragon Planner to discover the device. |
Version |
Line card version information. Example: rev A0 ver 4 |
Hostname |
Hostname of the device. |
Operational State |
Operational state of the device. |
Admin State |
Administrative state of the device. |
AS |
AS number assigned to the device. |
Table 4 explains the fields displayed in the Line Cards Usage report.
Field |
Description |
---|---|
Card Name |
Name of the line card. For example: WS-X6704-10GE |
Device Name |
Name of the device to which this part belongs. |
Card ID |
Location of the card on the device. Example: S-0/1 |
Connected Ports |
Sum of the number of ports that meet one or more of the following conditions:
|
Reserved Ports |
Number of reserved ports, based on the customizable keywords found in the description in the configuration file. |
Shutdown Ports |
Number of ports that have operational status or administrative status as Down. |
Number of Ports |
Number of ports on the line card. |
Hostname |
Hostname of the device. |
Table 5 explains the fields displayed in the Miscellaneous Parts report.
Field |
Description |
---|---|
Name |
Name of the device part. Example: Power supply, fan, display |
Device Name |
Name of the device to which this part belongs. |
Vendor |
Name of the device vendor. Example: Juniper |
IP Address |
IP address of the device to which the part belongs. |
Part |
Part number associated with the device part. |
Serial Number |
Serial number of the device part. |
Description |
Description for the device part. |
Estimated Cost |
Estimated cost of the device part. |
Hostname |
Hostname of the device. |
AS |
AS number assigned to the device. |
Model |
Additional details not known from the vendor, for example, by distinguishing JUNIPER and JUNIPER_EX. |
Card ID |
Location of the card on the device. Example: S-0/1 |
Table 6 explains the fields displayed in the Physical Interfaces report.
Field |
Description |
---|---|
Interface |
Name of the physical interface. Example: GigabitEthernet0/0/0/0 |
Device Name |
Name of the device that contains the physical interface. |
Vendor |
Name of the device vendor. Example: Juniper |
IP Address |
IP address of the physical interface. |
Admin Status |
Administrative status (active, down, or unknown) of the physical interface. |
IP Addr |
Loopback IP address of the device, typically the first IP address in the IP address range is listed. |
Media Type |
Media type for the physical interface. Example: Ethernet, FE, GE |
MTU |
Maximum Transmission Unit (MTU) of the physical interface. |
Bandwidth |
Bandwidth of the physical interface. Example: 1000.0M |
Physical Address |
Physical address (MAC address) for the physical interface. |
Operational Status |
Operational status (Active, Down, or Unknown) of the physical interface. |
Description |
Description for the physical interface. |
IPv6 |
IPv6 address of the physical interface, if any. |
Management IP Address |
Management IP Address that is used by Paragon Planner to discover the device. |
Card ID |
Location of the card on the device. Example: S-0/1 |
Aggregated Link |
Aggregated link (if any) associated with the physical interface. Example: PortChannel, Bundle-Ether |
VLAN |
List of VLANs on the physical interface. Example: 22 100-102 105-108 |
Switchport Mode |
Switchport mode for layer 2 interfaces. Example: Access or Trunk |
Hostname |
Hostname of the device. |
AS |
AS number assigned to the device. |
Table 7 explains the fields displayed in the Transceivers report.
Field |
Description |
---|---|
Name |
Name of the transceiver. Example: SFP-10GBase-ER |
Device Name |
Name of the device. |
Vendor |
Name of the device vendor. Example: Juniper |
IP Address |
Loopback IP address of the device, typically the first IP address in the IP address range is listed. |
Index |
Location of the card on the device. Example: S-0/1 |
Part |
The part number associated with the transceiver. |
Serial Number |
Serial number of the transceiver. |
Estimated Cost |
Estimated cost of the transceiver. |
Hostname |
Hostname of the device. |
AS |
AS number assigned to the device. |
ContainedIn |
Name of the line card that contains the transceiver. |