Add a Raw Data Summarization Profile
To add a raw data summarization profile that can be applied to a device group:
-
Click Configuration > Summarization Profiles > Raw
Data link in the left navigation bar.
The Raw Data Summarization Profiles page is displayed.
- Click + to add a summarization profile.
The Add Data Summarization Profile page appears.
- In the Name field, enter the name of the profile.
- Click Add Type Aggregate to add an aggregate
type.
The Name and Function drop-down lists are displayed.
Follow these steps to select a name data type and associate it with a data summarization algorithm.
The algorithm configured for a specific sensor path name overrides the algorithm configured for the corresponding data type.
-
Select a name data type from the
Name
drop-down list.
The available name data types to choose from are string, integer, boolean, float, and unsigned integer.
You can also select unsigned integer as a name data type. An unsigned integer is a data type that can contain values from 0 through 4,294,967,295.
-
After you have selected a name data type, you associate it with a data
summarization function.
To associate a name data type with a data summarization function, select a function from the Functions drop-down list.
The available functions to choose from are latest, count, mean, min, max, on-charge, stddev, and sum.
- (Optional) To add another aggregate type, click Add Type Aggregate, and repeat step 4.a and step 4.b.
-
Select a name data type from the
Name
drop-down list.
- Click Add Path Aggregate to add an aggregate
path.
The Name and Function drop-down lists are displayed.
To assign a sensor path name and associate it with a data summarization algorithm:
Note:The algorithm configured for a specific sensor path name overrides the algorithm configured for the corresponding data type.
-
Enter a sensor path name in the Name field.
You can enter a path name for a sensor that is not supported by Paragon Insights . For sensors supported by Paragon Insights , the path name must be entered in the following format:
Sensor
Path Name Format
Example
Open Config
sensor-path
/components/component/name
Native GPB
sensor-name:sensor-path
jnpr_qmon_ext:queue_monitor_element_info.percentage
iAgent
yaml-table-name:sensor-path
REutilizationTable:15_min_cpu_idle
SNMP
snmp-table-name:sensor-path
.1.3.6.1.2.1.2.2:jnxLED1Index
ospfNbrTable:ospfNbrIpAddr
Syslog
pattern-set: sensor-path
interface_link_down:operational-status
Flow (NetFlow)
template-name:sensor-path
hb-ipfix-ipv4-template:sourceIPv4Address
-
After you have entered a sensor path name, you associate it with a data
summarization function.
To associate a sensor path name with a data summarization function, select a function from the Functions drop-down list.
The available functions to choose from are latest, count, mean, min, max, on-charge, stddev, and sum.
- (Optional) To add another aggregate path, click Add Path Aggregate, and repeat step 5.a and step 5.b.
-
Enter a sensor path name in the Name field.
- Click Save to save the configuration or click Save and Deploy to save and deploy the configuration.
- You can now apply the raw data summarization profile that you added to a specific device group. For more information, see Apply Data Summarization Profiles.