Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Edit and Delete Tunnels

You can edit the parameters configured for tunnels and delete tunnels which you no longer need.

Edit Tunnels

To edit the parameters configured for a tunnel:

  1. Select Network > Topology.

    The Topology page is displayed with the topology map at the center and the network information table at the bottom of the page.

  2. In the Tunnel tab, select the check box corresponding to the tunnel for which you want to edit the parameters, and click the Edit icon.

    The Edit Tunnel page appears, displaying the same fields that are presented when you add a tunnel.

  3. Modify the parameters as needed. Based on the type of tunnel that you selected, see Add a Single Tunnel, Add Diverse Tunnels, or Add Multiple Tunnels for more information on these parameters.
    Note:

    You can modify only some fields when you are editing tunnel.
  4. Click Edit to save your changes.

    You are returned to the Topology page, where a confirmation message appears on the top of the page, indicating that an edit tunnel change request was successfully created:

    • If you have the Auto-approve permission assigned to your user role, the request is automatically approved and deployed on the devices.
    • If you don't have Auto-approve permission, the request must be manually approved and then, deployed. See About the Change Control Management Page.

    The tunnel parameters are then updated.

Delete Tunnels

To delete one or more tunnels:

  1. Select Network > Topology.

    The Topology page is displayed with the topology map at the center and the network information table at the bottom of the page.

  2. In the Tunnel tab, select the check box corresponding to the tunnels that you want to delete, and click the Delete icon.

    An alert message appears, asking you to confirm the delete operation.

  3. Click OK.

    You are returned to the Topology page, where a confirmation message appears, indicating that the delete tunnel change request was successfully created:

    • If you have the Auto-approve permission assigned to your user role, the request is automatically approved and deployed on the devices.
    • If you don't have the Auto-approve permission, the request must be manually approved and then, deployed. See About the Change Control Management Page.

    The selected tunnels are then deleted.

Related Documentation