This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.
ACX Series Universal Access Router Configuration Guide
The ACX Series Universal Access routers provide superior management for rapid provisioning to the access network. They are designed to support residential, mobile, and business access. This guide describes the key features supported on the ACX Series routers in detail. For a complete list of features and release dates, see Protocols and Applications Supported by the ACX Routers. For a list of Junos OS documentation that describes the complete list of features supported on the ACX Series routers, see https://www.juniper.net/techpubs/software/junos/.
|
|
|
- Overview
- Configuration
Configuration Overview CoS on ACX Series Universal Access Routers Features Overview
Classifiers and Rewrite Rules at the Global and Physical Interface Levels Overview
Inverse Multiplexing for ATM (IMA) Overview
Pseudowire Overview for ACX Series Universal Access Routers
Synchronous Ethernet Overview on the ACX Series Universal Access Routers
Autoinstallation - New or Changed Tasks ACX Series Autoinstallation Overview
Before You Begin Autoinstallation on an ACX Series Universal Access Router
Autoinstallation Configuration of ACX Series Universal Access Routers
Verifying Autoinstallation on ACX Series Universal Access Routers
CoS - New or Changed Tasks CoS on ACX Series Universal Access Routers Features Overview
Understanding CoS CLI Configuration Statements on ACX Series Universal Access Routers
Configuring CoS on ACX Series Universal Access Routers
Configuring Classifiers and Rewrite Rules at the Global and Physical Interface Levels
Firewall Filters - New or Changed Tasks Standard Firewall Filter Match Conditions and Actions on ACX Series Routers Overview
Standard Firewall Filter Match Conditions for IPv4 Traffic on ACX Series Routers
Standard Firewall Filter Match Conditions for MPLS Traffic on ACX Series Routers
Standard Firewall Filter Terminating Actions on ACX Series Routers
Standard Firewall Filter Nonterminating Actions on ACX Series Routers
Interfaces - New or Changed Tasks Checklist for Monitoring Fast Ethernet and Gigabit Ethernet Interfaces
Checklist for Monitoring T1 Interfaces
Gigabit Ethernet Autonegotiation Overview
Understanding Interfaces on ACX Series Universal Access Routers
Layer 2 and Layer 3 - New or Changed Tasks Configuring Interfaces for Layer 2 Circuits Overview
Configuring the Address for the Neighbor of the Layer 2 Circuit
Configuring the Neighbor Interface for the Layer 2 Circuit
Configuring a Community for the Layer 2 Circuit
Configuring the Control Word for Layer 2 Circuits
Configuring the Encapsulation Type for the Layer 2 Circuit Neighbor Interface
Configuring the MTU Advertised for a Layer 2 Circuit
Configuring the Protect Interface
Configuring the Virtual Circuit ID
Configuring the Interface Encapsulation Type for Layer 2 Circuits
Configuring Layer 2 Circuits over Both RSVP and LDP LSPs
Enabling the Layer 2 Circuit When the MTU Does Not Match
Enabling the Layer 2 Circuit When the Encapsulation Does Not Match
MPLS, VPNs, and Pseudowires- New or Changed Tasks MPLS Overview for ACX Series Universal Access Routers
TTL Processing on Incoming MPLS Packets
Redundant Pseudowires for Layer 2 Circuits and VPLS
Configuring Redundant Pseudowires for Layer 2 Circuits and VPLS
Configuring the Pseudowire Status TLV
Example: TDM Pseudowire Base Configuration
Example: ATM Pseudowire Base Configuration
Network Management - New or Changed Tasks Operations, Administration, and Management (OAM) - New or Changed Tasks Understanding Ethernet OAM Link Fault Management for ACX Series Routers
Configuring Ethernet Local Management Interface
Ethernet Frame Delay Measurements Overview
Ethernet Frame Loss Measurement Overview
Ethernet OAM Connectivity Fault Management
IEEE 802.1ag OAM Connectivity Fault Management Overview
Example: Configuring IEEE 802.3ah OAM Support for an Interface
Time Division Multiplexing (TDM) - New or Changed Tasks Configuring SAToP Emulation on Channelized T1 and E1 Interfaces
Configuring Inverse Multiplexing for ATM (IMA)
Configuring E1 BERT Properties
Configuring T1 BERT Properties
Timing and Synchronization - New or Changed Tasks Automatic Clock Selection Overview
Clock Sources for the ACX Series Universal Access Routers
Configuring External Clock Synchronization for ACX Series Routers
External Clock Synchronization Overview for ACX Series Routers
Global Positioning System (GPS) and the ACX Series Routers
Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
Synchronous Ethernet Overview on the ACX Series Universal Access Routers
Example: Configuring an Ordinary Slave Clock With Unicast-Negotiation
Example: Configuring an Ordinary Slave Clock Without Unicast-Negotiation
Upgrade and Installation - New or Changed Information ACX Series Autoinstallation Overview
Dual-Root Partitioning ACX Series Universal Access Routers Overview
Hardware Architecture Overview
Hardware Overview (ACX Series, M Series, MX Series, T Series, and TX Matrix Routers)
Boot Sequence (ACX Series Routers)
Load and Commit the Configuration File
Checking the Current Configuration and Candidate Software Compatibility
Understanding System Snapshot on an ACX Series Router
Example: Taking a Snapshot of the Software and Configuration
New or Changed Junos Configuration Statements classifiers (Physical Interface)
clock-class-to-quality-level-mapping
clock-mode (Chassis Synchronization)
convert-clock-class-to-quality-level
dscp (Class of Service Classifier)
dscp (Classifier on Physical Interface)
dscp (Rewrite Rules on Physical Interface)
encapsulation (Logical Interface)
encapsulation (Physical Interface)
ieee-802.1 (Classifier on Physical Interface)
ieee-802.1 (Rewrite Rules on Physical Interface)
inet-precedence (Classifier on Physical Interface)
inet-precedence (Rewrite Rules on Physical Interface)
interfaces (Chassis Synchronization Source)
quality-level (Chassis Synchronization Source Interface)
quality-level (Clock Class Mapping PTP Slave)
rewrite-rules (Physical Interfaces)
vpi (Logical Interface and Interworking)
Configuration Statement Hierarchies - New and Changed - Administration
Monitoring Commands for the ACX Universal Access Router request system snapshot (ACX Series)
show class-of-service interface
show class-of-service system-defaults
show poe telemetries interface (ACX2000 Routers)
- Troubleshooting
Troubleshooting Procedures Troubleshooting PoE Interfaces on ACX2000 Universal Access Routers
Knowledge Base
