TechLibrary

Documentation Quick Links

Navigation

Table of Contents

ATM Interfaces

Junos® OS Documentation for ACX, M, MX, PTX, and T Series Routers, Release 12.3

Overview
Configuration
Administration
Troubleshooting

ATM Interfaces

ATM Interfaces Overview

ATM1 Physical and Logical Configuration Statement Hierarchies

ATM2 IQ Physical and Logical Configuration Statement Hierarchies

Supported Features on ATM1 and ATM2 IQ Interfaces

Layer 2 Circuit Transport Mode on ATM MICs Overview

ATM Interfaces
ATM Interfaces Overview ATM1 Physical and Logical Configuration Statement Hierarchies ATM2 IQ Physical and Logical Configuration Statement Hierarchies Supported Features on ATM1 and ATM2 IQ Interfaces Layer 2 Circuit Transport Mode on ATM MICs Overview

ATM Interfaces

ATM Interfaces Overview

ATM1 Physical and Logical Configuration Statement Hierarchies

ATM2 IQ Physical and Logical Configuration Statement Hierarchies

Supported Features on ATM1 and ATM2 IQ Interfaces

Layer 2 Circuit Transport Mode on ATM MICs Overview

ATM Interfaces
Configuring Communication with Directly Attached ATM Switches and Routers Enabling ILMI for Cell Relay Enabling Passive Monitoring on ATM Interfaces Removing MPLS Labels from Incoming Packets Configuring the ATM PIC Type Configuring ATM Cell-Relay Promiscuous Mode Configuring the Maximum Number of ATM1 VCs on a VP Configuring Layer 2 Circuit Transport Mode Configuring Layer 2 Circuit Transport Mode on ATM MICs Example: Configuring Layer 2 Circuit Transport Mode on ATM MICs Configuring Layer 2 Circuit Cell-Relay Promiscuous Mode Configuring Layer 2 Circuit Trunk Mode Scheduling Configuring CoS Queues in Layer 2 Circuit Trunk Mode Configuring the Layer 2 Circuit Cell-Relay Cell Maximum Configuring the OAM F4 Cell Flows Defining Virtual Path Tunnels Configuring a Point-to-Point ATM1 or ATM2 IQ Connection Configuring a Point-to-Multipoint ATM1 or ATM2 IQ Connection Configuring a Multicast-Capable ATM1 or ATM2 IQ Connection Configuring Inverse ATM1 or ATM2 ARP Defining the ATM Traffic-Shaping Profile Configuring the ATM1 Queue Length Configuring the ATM2 IQ EPD Threshold Configuring Two EPD Thresholds per Queue Configuring the ATM2 IQ Transmission Weight Defining the ATM OAM F5 Loopback Cell Period Configuring the ATM OAM F5 Loopback Cell Threshold Configuring ATM Interface Encapsulation Configuring an ATM1 Cell-Relay Circuit Configuring PPP over ATM2 Encapsulation Configuring E3 and T3 Parameters on ATM Interfaces Configuring SONET/SDH Parameters on ATM Interfaces Configuring ATM2 IQ VC Tunnel CoS Components Configuring ATM Scheduler on Ethernet VPLS over a Bridged ATM Interface Example: Configuring ATM1 Interfaces Example: Configuring ATM2 IQ Interfaces Example: Configuring ATM Scheduler Map on Ethernet VPLS over Bridged ATM Interfaces

ATM Interfaces

Configuring Communication with Directly Attached ATM Switches and Routers

Enabling ILMI for Cell Relay

Enabling Passive Monitoring on ATM Interfaces

Removing MPLS Labels from Incoming Packets

Configuring the ATM PIC Type

Configuring ATM Cell-Relay Promiscuous Mode

Configuring the Maximum Number of ATM1 VCs on a VP

Configuring Layer 2 Circuit Transport Mode

Configuring Layer 2 Circuit Transport Mode on ATM MICs

Example: Configuring Layer 2 Circuit Transport Mode on ATM MICs

Configuring Layer 2 Circuit Cell-Relay Promiscuous Mode

Configuring Layer 2 Circuit Trunk Mode Scheduling

Configuring CoS Queues in Layer 2 Circuit Trunk Mode

Configuring the Layer 2 Circuit Cell-Relay Cell Maximum

Configuring the OAM F4 Cell Flows

Defining Virtual Path Tunnels

Configuring a Point-to-Point ATM1 or ATM2 IQ Connection

Configuring a Point-to-Multipoint ATM1 or ATM2 IQ Connection

Configuring a Multicast-Capable ATM1 or ATM2 IQ Connection

Configuring Inverse ATM1 or ATM2 ARP

Defining the ATM Traffic-Shaping Profile

Configuring the ATM1 Queue Length

Configuring the ATM2 IQ EPD Threshold

Configuring Two EPD Thresholds per Queue

Configuring the ATM2 IQ Transmission Weight

Defining the ATM OAM F5 Loopback Cell Period

Configuring the ATM OAM F5 Loopback Cell Threshold

Configuring ATM Interface Encapsulation

Configuring an ATM1 Cell-Relay Circuit

Configuring PPP over ATM2 Encapsulation

Configuring E3 and T3 Parameters on ATM Interfaces

Configuring SONET/SDH Parameters on ATM Interfaces

Configuring ATM2 IQ VC Tunnel CoS Components

Configuring ATM Scheduler on Ethernet VPLS over a Bridged ATM Interface

Example: Configuring ATM1 Interfaces

Example: Configuring ATM2 IQ Interfaces

Example: Configuring ATM Scheduler Map on Ethernet VPLS over Bridged ATM Interfaces

Network Interfaces Configuration Statements and Hierarchy
[edit interfaces] Hierarchy Level [edit logical-systems] Hierarchy Level

Network Interfaces Configuration Statements and Hierarchy

[edit interfaces] Hierarchy Level

[edit logical-systems] Hierarchy Level

Statement Summary
advertise-interval allow-any-vci aps atm-encapsulation atm-options atm-scheduler-map authentication-key buildout (E3 or T3 over ATM Interfaces) bytes cbit-parity cbr cell-bundle-size down-count e3-options encapsulation (Logical Interface) encapsulation (Physical Interface) epd-threshold (Logical Interface) epd-threshold (Physical Interface) family fast-aps-switch force forwarding-class (ATM2 IQ Scheduler Maps) framing (E1, E3, and T1 Interfaces) high-plp-max-threshold high-plp-threshold hold-time (APS) hold-time (SONET/SDH Defect Triggers) ilmi inverse-arp linear-red-profile linear-red-profiles lockout loopback (ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3) low-plp-max-threshold low-plp-threshold maximum-vcs mpls multicast-vci multipoint-destination neighbor (Automatic Protection Switching for SONET/SDH) oam-liveness oam-period paired-group passive-monitor-mode payload-scrambler pic-type plp1 plp-to-clp pop-all-labels priority (Schedulers) promiscuous-mode protect-circuit queue-depth queue-length receive-options-packets receive-ttl-exceeded request required-depth revert-time (Interfaces) rfc-2615 rtvbr scheduler-maps shaping t3-options transmit-weight (ATM2 IQ CoS Forwarding Class) transmit-weight (ATM2 IQ Virtual Circuit) trigger trunk-bandwidth trunk-id use-null-cw up-count vbr vc-cos-mode vci vpi (ATM CCC Cell-Relay Promiscuous Mode) vpi (Define Virtual Path) vpi (Logical Interface and Interworking) working-circuit z0-increment

Statement Summary

buildout (E3 or T3 over ATM Interfaces)

encapsulation (Logical Interface)

encapsulation (Physical Interface)

epd-threshold (Logical Interface)

epd-threshold (Physical Interface)

family

fast-aps-switch

force

forwarding-class (ATM2 IQ Scheduler Maps)

framing (E1, E3, and T1 Interfaces)

high-plp-max-threshold

high-plp-threshold

hold-time (APS)

hold-time (SONET/SDH Defect Triggers)

loopback (ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3)

low-plp-max-threshold

multipoint-destination

neighbor (Automatic Protection Switching for SONET/SDH)

priority (Schedulers)

receive-options-packets

receive-ttl-exceeded

request

required-depth

revert-time (Interfaces)

transmit-weight (ATM2 IQ CoS Forwarding Class)

transmit-weight (ATM2 IQ Virtual Circuit)

vpi (ATM CCC Cell-Relay Promiscuous Mode)

vpi (Define Virtual Path)

vpi (Logical Interface and Interworking)

working-circuit

z0-increment

Administration
Monitoring Commands
show class-of-service
show class-of-service forwarding-class
show ilmi
show interfaces (ATM)
show interfaces (ATM-over-ADSL)
show interfaces (ATM-over-SHDSL)
show interfaces queue
Command Summary
Junos OS Operational Mode Commands.

Monitoring Commands
show class-of-service show class-of-service forwarding-class show ilmi show interfaces (ATM) show interfaces (ATM-over-ADSL) show interfaces (ATM-over-SHDSL) show interfaces queue

Command Summary
Junos OS Operational Mode Commands.

Interface Diagnostics
Interface Diagnostics

Knowledge Base
Juniper Knowledge Base

Troubleshooting ATM Interfaces
Investigating Interface Steps and Commands Determining ATM Interface Type Monitoring ATM Interfaces Using Loopback Testing for ATM Interfaces Locating ATM Alarms and Errors Identifying the ATM Interface Type Verifying the Configuration of an ATM MIC Interface Monitoring ATM MIC Interfaces

Troubleshooting ATM Interfaces

Investigating Interface Steps and Commands

Determining ATM Interface Type

Monitoring ATM Interfaces

Using Loopback Testing for ATM Interfaces

Locating ATM Alarms and Errors

Identifying the ATM Interface Type

Verifying the Configuration of an ATM MIC Interface

Monitoring ATM MIC Interfaces

Supported Platforms

Downloads

Junos® OS ATM Interfaces Configuration Guide