Help us improve your experience.
Let us know what you think.
Do you have time for a two-minute survey?
Additional Comments
800 characters remaining
May we contact you if necessary?
This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.
Junos® OS Documentation for ACX, M, MX, PTX, and T Series Routers, Release 12.3
Serial Interfaces Overview
Configuring the Serial Line Protocol
Configuring the Serial Clocking Mode
Configuring the Serial Idle Cycle Flag
Configuring the Serial Signal Handling
Configuring the Serial DTR Circuit
Configuring Serial Signal Polarities
Configuring Serial Loopback Capability
Configuring Serial Line Encoding
Specifying a USB Modem Interface on J Series Routers
Example: Physical Interface Configuration Statements for Serial Interfaces
[edit interfaces] Hierarchy Level
[edit logical-systems] Hierarchy Level
clocking-mode
clock-rate
control-polarity
control-signal
cts
cts-polarity
dcd
dcd-polarity
dce-options
dsr
dsr-polarity
dte-options
dtr-circuit
dtr
dtr-polarity
encoding
fast-aps-switch
idle-cycle-flag
ignore-all
indication
indication-polarity
init-command-string
line-protocol
loopback (Serial)
modem-options
rts
rts-polarity
serial-options
tm
tm-polarity
transmit-clock
show interfaces (Serial)
Serial Interface Operational Mode Commands
Junos OS Operational Mode Commands.
Interface Diagnostics
Juniper Knowledge Base
© 1999 - 2018 Juniper Networks, Inc. All rights reserved