JUNIPER-L2CP-FEATURES-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE FROM SNMPv2-SMI
DisplayString, TruthValue FROM SNMPv2-TC
InterfaceIndex, ifIndex FROM IF-MIB
dot1dStpPort, dot1dStpPortEntry FROM BRIDGE-MIB
jnxL2cpMibRoot FROM JUNIPER-SMI;
jnxL2cpFeaturesMIB MODULE-IDENTITY
LAST-UPDATED "201206250000Z"
ORGANIZATION "Juniper Networks, Inc."
CONTACT-INFO
"Juniper Technical Assistance Center
Juniper Networks, Inc.
1194 N. Mathilda Avenue
Sunnyvale, CA 94089
E-mail: support@juniper.net"
DESCRIPTION
"This mib module is for Juniper Networks Proprietory
Layer 2 control protocol (L2CP) features"
REVISION "201206250000Z" -- June 25, 2012
DESCRIPTION "Modifying max access for LacpTimeOut trap objects."
REVISION "201208150000Z" -- Aug 15, 2012
DESCRIPTION "Added new mib jnxLacpAggTimeout."
REVISION "201006110000Z" -- June 11, 2010
DESCRIPTION "Added new trap jnxLacpTimeOut."
::= { jnxL2cpMibRoot 1 }
jnxL2cpObjects OBJECT IDENTIFIER ::= { jnxL2cpFeaturesMIB 1 }
jnxL2cpNotifications OBJECT IDENTIFIER ::= { jnxL2cpFeaturesMIB 2 }
jnxL2cpStpProtectObjects OBJECT IDENTIFIER ::= { jnxL2cpObjects 1 }
jnxL2cpBpduProtectObjects OBJECT IDENTIFIER ::= { jnxL2cpObjects 2 }
jnxDot1dStpPortProtectTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxDot1dStpPortProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the jnxDot1dStp Port Table for providing enterprise specific
extensions for Root Protect and Loop Protect to the corresponding
dot1dStpPortTable entry."
::= { jnxL2cpStpProtectObjects 1 }
jnxDot1dStpPortProtectEntry OBJECT-TYPE
SYNTAX JnxDot1dStpPortProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the jnxDot1dStpPortProtectTable. This essentially
augments the dot1dStpPortTable with additional objects."
AUGMENTS { dot1dStpPortEntry }
::= { jnxDot1dStpPortProtectTable 1 }
JnxDot1dStpPortProtectEntry ::=
SEQUENCE {
jnxDot1dStpPortRootProtectEnabled TruthValue,
jnxDot1dStpPortRootProtectState INTEGER,
jnxDot1dStpPortLoopProtectEnabled TruthValue,
jnxDot1dStpPortLoopProtectState INTEGER
}
jnxDot1dStpPortRootProtectEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Boolean value set by management indicating whether Root protect
functionality is enabled on the port. If TRUE causes the Port not
to be selected as Root Port, even it has the best spanning tree
priority vector. This parameter should be FALSE by default. "
::= { jnxDot1dStpPortProtectEntry 1 }
jnxDot1dStpPortRootProtectState OBJECT-TYPE
SYNTAX INTEGER {
no-error (0),
root-prevented (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port was prevented from being a root port.
This parameter will always return 'no-error (0)' if
jnxDot1dStpPortRootProtectEnabled is FALSE. "
::= { jnxDot1dStpPortProtectEntry 2 }
jnxDot1dStpPortLoopProtectEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Boolean value set by management indicating whether Loop protect
functionality is enabled on the port. If TRUE causes the Port not
to be selected as Designated Port when the received superior BPDU
is aged out. This parameter should be FALSE by default. "
::= { jnxDot1dStpPortProtectEntry 3 }
jnxDot1dStpPortLoopProtectState OBJECT-TYPE
SYNTAX INTEGER {
no-error (0),
loop-prevented (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether a potential Loop was prevented on the port
This parameter will always return 'no-error (0)' if
jnxDot1dStpPortLoopProtectEnabled is FALSE. "
::= { jnxDot1dStpPortProtectEntry 4 }
jnxL2cpBpduProtectPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF JnxL2cpBpduProtectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines a Port Table for BPDU Protect information. This contains
only those ports on which BPDU Protect can be configured."
::= { jnxL2cpBpduProtectObjects 1 }
jnxL2cpBpduProtectPortEntry OBJECT-TYPE
SYNTAX JnxL2cpBpduProtectPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the jnxL2cpBpduProtectPortTable. A list
containing BPDU Protect information for each Port."
INDEX { ifIndex }
::= { jnxL2cpBpduProtectPortTable 1 }
JnxL2cpBpduProtectPortEntry ::=
SEQUENCE {
jnxL2cpBpduProtectPortEnabled TruthValue,
jnxL2cpPortBpduError INTEGER
}
jnxL2cpBpduProtectPortEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Boolean value set by management indicating whether BPDU protect
functionality is enabled on the port. If TRUE causes the Port to be
disabled (link down) upon receipt of a BPDU. This parameter should be
FALSE by default. "
::= { jnxL2cpBpduProtectPortEntry 1 }
jnxL2cpPortBpduError OBJECT-TYPE
SYNTAX INTEGER {
no-error (0),
detected (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether a BPDU was received on the port.
This parameter will always return 'no-error (0)' if
jnxL2cpBpduProtectPortEnabled is FALSE. "
::= { jnxL2cpBpduProtectPortEntry 2 }
jnxL2cpBpduProtectDisableTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the value of time (in seconds) after which a port on
which BPDU error was detected will be re-enabled. A returned
value of 0 indicates that port will not be re-enabled
automatically."
::= { jnxL2cpBpduProtectObjects 2 }
jnxL2cpProtectTraps OBJECT IDENTIFIER ::= { jnxL2cpNotifications 0 }
jnxPortRootProtectStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
jnxDot1dStpPortRootProtectState
}
STATUS current
DESCRIPTION
"Generated when the ports Root-protect state (no-error or root-prevented)
changes."
::= { jnxL2cpProtectTraps 1 }
jnxPortLoopProtectStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
jnxDot1dStpPortLoopProtectState
}
STATUS current
DESCRIPTION
"Generated when the ports Loop-protect state (no-error or loop-prevented)
changes."
::= { jnxL2cpProtectTraps 2 }
jnxPortBpduErrorStatusChangeTrap NOTIFICATION-TYPE
OBJECTS {
jnxL2cpPortBpduError
}
STATUS current
DESCRIPTION
"Generated when the ports BPDU error state (no-error or detected)
changes."
::= { jnxL2cpProtectTraps 3 }
-- ***************************************************************
-- Lacp Traps / Notifications Section
-- ***************************************************************
-- Lacp Notification Variables/Objects
jnxLacpNotifyVars OBJECT IDENTIFIER ::= { jnxL2cpObjects 3 }
jnxLacpAggTimeout OBJECT IDENTIFIER ::= { jnxL2cpObjects 4 }
jnxLacpNotificationsPrefix OBJECT IDENTIFIER ::= { jnxL2cpNotifications 1 }
LacpState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Actor and Partner State values from the LACPDU."
SYNTAX BITS {
lacpActivity(0),
lacpTimeout(1),
aggregation(2),
synchronization(3),
collecting(4),
distributing(5),
defaulted(6),
expired(7)
}
jnxLacpInterfaceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Lacp member interface."
::= { jnxLacpNotifyVars 1 }
jnxLacpifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Snmp ifIndex of member interface."
::= { jnxLacpNotifyVars 2 }
jnxLacpAggregateInterfaceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Lacp Aggregate interface."
::= { jnxLacpNotifyVars 3 }
jnxLacpAggregateifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Snmp ifIndex of Aggregator."
::= { jnxLacpNotifyVars 4 }
jnxLacpAggPortActorOperState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Port actor operational state."
::= { jnxLacpNotifyVars 5 }
jnxLacpTimeOut NOTIFICATION-TYPE
OBJECTS { jnxLacpInterfaceName,
jnxLacpifIndex,
jnxLacpAggregateInterfaceName,
jnxLacpAggregateifIndex,
jnxLacpAggPortActorOperState
}
STATUS current
DESCRIPTION
"Lacp times out"
::= { jnxLacpNotificationsPrefix 1 }
dot3adAggPortTimeoutTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot3adAggPortTimeoutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Link Aggregation Timeout information
about a port that is associated with this device.
A row appears in this table for each physical port."
REFERENCE
"IEEE 802.3"
::= { jnxLacpAggTimeout 1 }
dot3adAggPortTimeoutEntry OBJECT-TYPE
SYNTAX Dot3adAggPortTimeoutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Link Aggregation Control Protocol timeout information
for a port on this device."
INDEX { ifIndex }
::= { dot3adAggPortTimeoutTable 1 }
Dot3adAggPortTimeoutEntry ::=
SEQUENCE {
dot3adInterfaceName
DisplayString,
dot3adOperState
LacpState,
dot3adAggname
DisplayString,
dot3adInterfaceTimeout
TimeTicks
}
dot3adInterfaceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Physical port that is associated with
Aggregation Port. This value is read-only."
REFERENCE
"IEEE 802.3"
::= { dot3adAggPortTimeoutEntry 1 }
dot3adOperState OBJECT-TYPE
SYNTAX LacpState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of 8 bits, corresponding to the current
operational values of Actor_State as transmitted by the
Actor in LACPDUs. The bit allocations are as defined in
30.7.2.1.20. This attribute value is read-only."
REFERENCE
"IEEE 802.3 Subclause 30.7.2.1.21"
::= { dot3adAggPortTimeoutEntry 2 }
dot3adAggname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Aggregation Port where Physical port
is associated with. This value is read-only."
REFERENCE
"IEEE 802.3"
::= { dot3adAggPortTimeoutEntry 3 }
dot3adInterfaceTimeout OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the time elapsed in seconds
since lacp experienced timeout.
This value is read-only."
REFERENCE
"IEEE 802.3"
::= { dot3adAggPortTimeoutEntry 4 }
END