This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.
System Basics: Layer 2 Network Access Protocols Configuration Guide
The Junos operating system (Junos OS) enables you to configure Layer 2 network access protocols such as the Point-to-Point Protocol (PPP) and Layer 2 Tunneling Protocol (L2TP) at the [edit access] hierarchy level of the CLI. Use the topics on this page to configure common Layer 2 protocols.
|
|
- Overview
Network Access Configuration Overview - Configuration
Configuring PPP and L2TP Configuring the PPP Authentication Protocol
Example: Configuring CHAP Authentication with RADIUS
Configuring L2TP for Enabling PPP Tunneling Within a Network
Defining the Minimum L2TP Configuration
Configuring the Address Pool for L2TP Network Server IP Address Allocation
Example: Configuring an Address-Assignment Pool
Configuring the Group Profile for Defining L2TP Attributes
Example: Group Profile Configuration
Configuring Access Profiles for L2TP or PPP Parameters
Configuring an IKE Access Profile
Example: Defining the Default Tunnel Client
Example: Defining the User Group Profile
Configuring the CHAP Secret for an L2TP Profile
Example: Configuring L2TP PPP CHAP
Referencing the Group Profile from the L2TP Profile
Configuring L2TP Properties for a Client-Specific Profile
Example: L2TP Multilink PPP Support on Shared Interfaces
Configuring the PAP Password for an L2TP Profile
Example: Configuring PAP for an L2TP Profile
Configuring PPP Properties for a Client-Specific Profile
Applying a Configured PPP Group Profile to a Tunnel
Example: Applying a User Group Profile on the M7i or M10i Router
Configuring RADIUS Authentication for L2TP Configuring RADIUS Authentication for L2TP
RADIUS Local Loopback Interface Attribute for L2TP Overview
Example: Configuring RADIUS Authentication for L2TP
Configuring the RADIUS Disconnect Server for L2TP
Configuring RADIUS Authentication for an L2TP Client and Profile
Example: Configuring RADIUS Authentication for an L2TP Profile
Example: Configuring RADIUS-Based Subscriber Authentication and Accounting
Configuration Statements accounting-stop-on-access-deny
circuit-id (Address-Assignment Pools)
circuit-type (DHCP Local Server)
client-authentication-algorithm
client-groupclient-session-timeout
dhcp-attributes (Address-Assignment Pools)
domain-name (Address-Assignment Pools)
group-profile (Associating with Client)
host (Address-Assignment Pools)
initiate-dead-peer-detection (IPsec)
option-82 (Address-Assignment Pools)
pool (Address-Assignment Pools)
pre-shared-key (Access Profile)
range (Address-Assignment Pools)
- Administration
- Troubleshooting
Knowledge Base
