This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.
ACX Series Universal Access Router Getting Started Guide
The ACX Series Universal Access routers provide superior management for rapid provisioning to the access network. They are designed to support residential, mobile, and business access. This guide describes the key features supported on the ACX Series routers in detail. For a complete list of features and release dates, see Protocols and Applications Supported by the ACX Routers. For a list of Junos OS documentation that describes the complete list of features supported on the ACX Series routers, see https://www.juniper.net/techpubs/software/junos/.
|
|
- Overview
- Configuration
Configuration Overview Classifiers and Rewrite Rules at the Global and Physical Interface Levels Overview
CoS on ACX Series Universal Access Routers Features Overview
Ethernet Link Aggregation Overview for ACX Series Routers
Gigabit Ethernet Autonegotiation Overview
IEEE 1588v2 PTP Boundary Clock Overview
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
Inverse Multiplexing for ATM (IMA) Overview
IPv6 Support on ACX Series Universal Access Routers
Pseudowire Overview for ACX Series Universal Access Routers
Storm Control on ACX Series Routers Overview
Synchronous Ethernet Overview on the ACX Series Universal Access Routers
Autoinstallation ACX Series Autoinstallation Overview
Before You Begin Autoinstallation on an ACX Series Universal Access Router
Autoinstallation Configuration of ACX Series Universal Access Routers
Verifying Autoinstallation on ACX Series Universal Access Routers
CoS CoS on ACX Series Universal Access Routers Features Overview
CoS on ATM IMA Pseudowire Interfaces Overview
Understanding CoS CLI Configuration Statements on ACX Series Universal Access Routers
Configuring CoS on ACX Series Universal Access Routers
Configuring Classifiers and Rewrite Rules at the Global and Physical Interface Levels
Configuring Fixed Classification on an ATM IMA Pseudowire
Configuring Policing on an ATM IMA Pseudowire
Configuring Shaping on an ATM IMA Pseudowire
Example: Configuring Fixed Classification on an ATM IMA Pseudowire
Firewall Filters Standard Firewall Filter Match Conditions and Actions on ACX Series Routers Overview
Standard Firewall Filter Match Conditions for IPv4 Traffic on ACX Series Routers
Standard Firewall Filter Match Conditions for MPLS Traffic on ACX Series Routers
Standard Firewall Filter Terminating Actions on ACX Series Routers
Standard Firewall Filter Nonterminating Actions on ACX Series Routers
Filter-Based Forwarding for Routing Instances
Forwarding Table Filters for Routing Instances on ACX Series Routers
Interfaces BERT Support on CT1 and CE1 Interfaces
Checklist for Monitoring Fast Ethernet and Gigabit Ethernet Interfaces
Checklist for Monitoring T1 Interfaces
Configuring the Media MTU on ACX Series Routers
Gigabit Ethernet Autonegotiation Overview
Understanding Interfaces on ACX Series Universal Access Routers
Layer 2 and Layer 3 Configuring Interfaces for Layer 2 Circuits Overview
Configuring the Address for the Neighbor of the Layer 2 Circuit
Configuring the Neighbor Interface for the Layer 2 Circuit
Configuring a Community for the Layer 2 Circuit
Configuring the Control Word for Layer 2 Circuits
Configuring the Encapsulation Type for the Layer 2 Circuit Neighbor Interface
Configuring the MTU Advertised for a Layer 2 Circuit
Configuring the Protect Interface
Configuring the Virtual Circuit ID
Configuring the Interface Encapsulation Type for Layer 2 Circuits
Configuring Layer 2 Circuits over Both RSVP and LDP LSPs
Enabling the Layer 2 Circuit When the MTU Does Not Match
Enabling the Layer 2 Circuit When the Encapsulation Does Not Match
MPLS, VPNs, and Pseudowires MPLS Overview for ACX Series Universal Access Routers
TTL Processing on Incoming MPLS Packets
Redundant Pseudowires for Layer 2 Circuits and VPLS
Configuring Redundant Pseudowires for Layer 2 Circuits and VPLS
Configuring the Pseudowire Status TLV
Example: TDM Pseudowire Base Configuration
Example: ATM Pseudowire Base Configuration
Network Management Standard SNMP MIBs Supported by Junos OS
Juniper Networks Enterprise-Specific MIBs and Supported Devices
Operations, Administration, and Management (OAM) Understanding Ethernet OAM Link Fault Management for ACX Series Routers
Configuring Ethernet Local Management Interface
Ethernet Frame Delay Measurements Overview
Ethernet Frame Loss Measurement Overview
Ethernet OAM Connectivity Fault Management
IEEE 802.1ag OAM Connectivity Fault Management Overview
Example: Configuring IEEE 802.3ah OAM Support for an Interface
Routing Protocols IPv6 Support on ACX Series Universal Access Routers
Time Division Multiplexing (TDM) Configuring CESoPSN Encapsulation on DS Interfaces
Configuring CE1 Channels Down to DS Interfaces
Configuring SAToP Emulation on Channelized T1 and E1 Interfaces
Configuring Inverse Multiplexing for ATM (IMA)
Configuring E1 BERT Properties
Configuring T1 BERT Properties
Timing and Synchronization Automatic Clock Selection Overview
Clock Sources for the ACX Series Universal Access Routers
External Clock Synchronization Overview for ACX Series Routers
Configuring External Clock Synchronization for ACX Series Routers
Global Positioning System (GPS) and the ACX Series Routers
Configuring Precision Time Protocol Clocking
Configuring a PTP Master Boundary Clock
G.703 2.048MHz Signal Type for BITS Interfaces Overview
Example: Configuring a PTP Boundary Clock
Example: Configuring a PTP Boundary Clock With Unicast Negotiation
Example: Configuring an Ordinary Slave Clock With Unicast-Negotiation
Example: Configuring an Ordinary Slave Clock Without Unicast-Negotiation
Upgrade and Installation ACX Series Autoinstallation Overview
Dual-Root Partitioning ACX Series Universal Access Routers Overview
Junos OS Release 12.2 or Later Upgrades with Dual-Root Partitioning on ACX Series Routers
Installing Junos OS Using a USB Storage Device on ACX Series Routers
Installing Junos OS Upgrades from a Remote Server on ACX Series Routers
Hardware Architecture Overview
Hardware Overview (ACX Series, M Series, MX Series, T Series, and TX Matrix Routers)
Boot Sequence (ACX Series Routers)
Load and Commit the Configuration File
Checking the Current Configuration and Candidate Software Compatibility
Understanding System Snapshot on an ACX Series Router
Example: Taking a Snapshot of the Software and Configuration
Junos Configuration Statements Key Configuration Statements Supported on ACX Series Routers
Configuration Statement Hierarchies Key Configuration Statement Hierarchies Supported on ACX Series Routers
- Administration
Monitoring Commands for the ACX Universal Access Router request system snapshot (ACX Series)
show class-of-service interface
show class-of-service system-defaults
show interfaces (T1, E1, or DS)
show (ospf | ospf3) io-statistics
show (ospf | ospf3) statistics
show poe telemetries interface (ACX2000 Routers)
show route advertising-protocol
show system autoinstallation status
- Troubleshooting
Troubleshooting Procedures CT1 and CE1 Interfaces Alarms, Errors, and Defects
Troubleshooting PoE Interfaces on ACX2000 Universal Access Routers
Knowledge Base
