TechLibrary

Documentation Quick Links

Table of Contents

T1 Interfaces Feature Guide for Routing Devices

Junos OS Network Interfaces Library for Routing Devices

Overview
Configuration
Administration
Troubleshooting

T1 Interfaces
T1 Interfaces Overview

Overview
T1 Interfaces
T1 Interfaces Overview

T1 Interfaces
Configuring T1 Physical Interface Properties Configuring T1 BERT Properties Configuring the T1 Buildout Configuring T1 Byte Encoding Configuring T1 CRC Error Major Alarm Thresholds Configuring T1 CRC Error Minor Alarm Thresholds Configuring T1 Data Inversion Configuring the T1 Frame Checksum Configuring the T1 Remote Loopback Response Configuring T1 Framing Configuring T1 Line Encoding Configuring T1 Loopback Capability Configuring the T1 Idle Cycle Flag Configuring T1 Start and End Flags Configuring Fractional T1 Time Slots

T1 Interfaces

Configuring T1 Physical Interface Properties

Configuring T1 BERT Properties

Configuring the T1 Buildout

Configuring T1 Byte Encoding

Configuring T1 CRC Error Major Alarm Thresholds

Configuring T1 CRC Error Minor Alarm Thresholds

Configuring T1 Data Inversion

Configuring the T1 Frame Checksum

Configuring the T1 Remote Loopback Response

Configuring T1 Framing

Configuring T1 Line Encoding

Configuring T1 Loopback Capability

Configuring the T1 Idle Cycle Flag

Configuring T1 Start and End Flags

Configuring Fractional T1 Time Slots

Network Interfaces Configuration Statements and Hierarchy
[edit interfaces] Hierarchy Level [edit logical-systems] Hierarchy Level

Network Interfaces Configuration Statements and Hierarchy

[edit interfaces] Hierarchy Level

[edit logical-systems] Hierarchy Level

Statement Summary
bert-algorithm bert-error-rate bert-period buildout (T1 Interfaces) byte-encoding crc-major-alarm-threshold crc-minor-alarm-threshold e1-options fast-aps-switch fcs framing (E1, E3, and T1 Interfaces) idle-cycle-flag invert-data line-encoding loopback (ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3) remote-loopback-respond start-end-flag t1-options timeslots

Statement Summary

bert-algorithm

bert-error-rate

bert-period

buildout (T1 Interfaces)

byte-encoding

crc-major-alarm-threshold

crc-minor-alarm-threshold

e1-options

fast-aps-switch

fcs

framing (E1, E3, and T1 Interfaces)

idle-cycle-flag

invert-data

line-encoding

loopback (ADSL, DS0, E1/E3, SONET/SDH, SHDSL, and T1/T3)

remote-loopback-respond

start-end-flag

t1-options

timeslots

Administration
Monitoring Commands
show interfaces (T1, E1, or DS)
Command Summary
Junos OS Operational Mode Commands.
Troubleshooting
Interface Diagnostics
Interface Diagnostics
Interface Diagnostics Operational Mode Commands
Monitor T1 Interfaces
Knowledge Base
Juniper Knowledge Base
Investigate T1 Interfaces
Investigating Interface Steps and Commands
Troubleshooting T1 Interfaces
Use Loopback Testing for T1 Interfaces
Locate T1 Alarms and Errors

Monitoring Commands
show interfaces (T1, E1, or DS)

Command Summary
Junos OS Operational Mode Commands.

Interface Diagnostics
Interface Diagnostics Interface Diagnostics Operational Mode Commands Monitor T1 Interfaces

Knowledge Base
Juniper Knowledge Base

Investigate T1 Interfaces
Investigating Interface Steps and Commands Troubleshooting T1 Interfaces Use Loopback Testing for T1 Interfaces Locate T1 Alarms and Errors

Supported Platforms

Downloads

Download this page: T1 Interfaces