Download This Guide
Supported Platforms
Related Documentation
- J, LN, SRX Series
- Security Policies Overview
- Understanding Custom Policy Applications
- Example: Defining a Custom ICMP Application
- Additional Information
- Security Policy Applications Feature Guide for Security Devices
Example: Adding and Modifying Custom Policy Applications
This example shows how to add and modify custom policy applications.
Requirements
Before you begin, create addresses and security zones. See Example: Creating Security Zones.
Overview
In this example, you create a custom application using the following information:
- A name for the application: cust-telnet.
- A range of source port numbers: 1 through 65535.
- A destination port number: 23000.
- The protocol used by the application: TCP.
Configuration
Step-by-Step Procedure
The following example requires you to navigate through various levels in the configuration hierarchy. For instructions on how to do that, see “Using the CLI Editor in Configuration Mode.”
To add and modify a custom policy application:
Configure TCP and specify the source port and destination port.
[edit applications application cust-telnet]user@host# set protocol tcp source-port 1–65535 destination-port 23000Specify the length of time that the application is inactive.
[edit applications application cust-telnet]user@host# set inactivity-timeout 1800Modify a custom policy application.
[edit applications application cust-telnet]user@host# delete protocol tcpuser@host# set application-protocol ftp- If you are done configuring the device, commit the configuration. [edit]user@host# commit
Verification
To verify the configuration is working properly, enter the show applications application command.
 | Note: The timeout value is in seconds. If you do not set it, the timeout value of a custom application is 1800 seconds. If you do not want an application to time out, type never. |
Related Documentation
- J, LN, SRX Series
- Security Policies Overview
- Understanding Custom Policy Applications
- Example: Defining a Custom ICMP Application
- Additional Information
- Security Policy Applications Feature Guide for Security Devices
Published: 2014-06-17
Download This Guide
Supported Platforms
Related Documentation
- J, LN, SRX Series
- Security Policies Overview
- Understanding Custom Policy Applications
- Example: Defining a Custom ICMP Application
- Additional Information
- Security Policy Applications Feature Guide for Security Devices
