Cisco CSR-1000v VNF Configuration Settings
 | Best Practice: Service providers configure base settings for a VNF. Customers should not change these values unless directed to do so by their service provider. Service providers may provide some generic examples of service configurations for their customers. Customers can configure services—for example, by creating policies—appropriate to their networks in Customer Portal. |
Use the information in the following tables to provide values for the available settings:
 | Note: The tables are applicable for centralized deployment model only. |
- Table 1 shows the base settings you can configure for the virtual machine (VM) that contains the VNF.
- Table 2 shows the firewall settings you can configure.
Table 1: Fields for the CSR-1000v Base Settings
Field | Description |
|---|---|
Host Name | Specify the hostname of the VM. Example: host1 |
Loopback Address | Specify the IPv4 loopback IP address. Example: 10.0.2.50 |
Name Servers | Specify the fully qualified domain names (FQDNs) or IP addresses of one or more DNS name servers. Example: 10.0.2.15 |
NTP Servers | Specify the FQDNs or IP addresses of one or more NTP servers. Example: ntp.example.net |
Table 2: Fields for the CSR-1000v Firewall Settings
Field | Description |
|---|---|
Left Interface | Specify the identifier of the interface that transmits data to the host. Example: GigabitEthernet2 |
Right Interface | Specify the identifier of the interface receiving data transmitted by the host. Example: GigabitEthernet3 |
Left to Right Allowed Apps | Select the applications from the drop-down list for which the policy is enforced in outgoing packets. The following applications are available:
Example: http, https |
Right to Left Allowed Apps | Select the application from the drop-down list for which the policy is enforced for incoming packets. The following applications are available:
Example: ftp, udp |
