Rate and give feedback:  Feedback Received. Thank You!

Rate and give feedback: 

X

This document helped resolve my issue

Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  

E-mail: 

Enter a valid Email ID

Need product assistance? Contact Juniper Support

Submit

This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.

English  

English

Managing LAN Segments on a Tenant Site

Creating LAN Segments

You create LAN segments from the Sites > Site Management > Site Name page.

1. Click the add icon (+) on the LAN tab.
2. Complete the configuration settings according to the guidelines provided in Table 1.

   Table 1: Create LAN Segment Page

   Field	Description
   Name	Enter a unique string of alphanumeric characters and some special characters (. -). No spaces are allowed and the maximum length is 15 characters.
   Ports	Select a port number from the list. Depending on the device configured in the connection plan, you can select up to two port numbers.
   VLAN ID	Specify the VLAN ID that is associated with the MPLS data link.
   DHCP	Enable or disable DHCP. Enable DHCP to assign IP addresses by using a DHCP sever. Disable DHCP to assign static IP addresses. By default, DHCP is disabled.
   Subnet	Enter the subnet mask of the DHCP IP address pool.
   Address Range Low	Enter the starting IP address in the range of IP addresses that can be allocated by the DHCP server to the LAN segment.
   Address Range High	Enter the ending IP address in the range of IP addresses that can be allocated by the DHCP server to the LAN segment.
   Maximum Lease Time	Specify the maximum duration of time (in seconds) for which a client can request for and hold a lease on a DHCP server. You can enter a value in the range 0 through 4,294,967,295 seconds.
   Name Server	Enter the IPv4 address of the DNS server. DNS servers are used for resolving hostnames to IP addresses.
   Department	Select a department to which the LAN segment is to be assigned. You group LAN segments as departments for ease of management and for applying policies at the department-level. To create a new department and assign the LAN segment to it, click the Create Department link. See Creating a Department.

   Note: You must select at least one port, one IP address prefix, or one VLAN ID.

3. Click OK.

   The new LAN segment s displayed on the tenant site page.

Modifying LAN Segments

You can modify a LAN segments from the Sites > Site Management > Site Name page.

1. Select a LAN segment and click the edit icon on the LAN tab.
2. Modify the configuration settings, as necessary, according to the guidelines provided in Table 1.
3. Click OK.

   The modified LAN segment is displayed.

Deleting LAN Segments

You can delete a LAN segments from the Sites > Site Management > Site Name page.

1. Select a LAN segment and click the delete icon (X) icon on the LAN tab.

   The Delete LAN Segment page appears.

2. Click OK to confirm deletion.

   The LAN segment is deleted.