Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Expand All close

Expand All close

Using CESoPSN Bundles to Group DS0s on IP Circuits

Copyright and Trademark Information
Table of Contents
List of Tables
play_arrow Overview
- play_arrow Using Bundles to Create Logical Configurations for Physical Interfaces Overview
  - Types of Bundles Overview
  - Interface Naming Conventions for the CTP Series
- play_arrow CESoPSN Bundle Overview
  - CESoPSN Bundle Overview
  - Providing QoS for CTP Bundles by Using Service Type Overview
play_arrow Configuration
- play_arrow Configuring CESoPSN Bundles (CTP Menu)
- play_arrow Configuring CESoPSN Bundles (CTPView)
play_arrow Administration

list Table of Contents

English

Configuring Serial Loops for CESoPSN Bundles (CTPView)

date_range 27-Jan-20

Serial loops will run on transparent circuits only if the transparent circuits use the SD and RD signals to transport data.

To configure serial loops using CTPView:

In the side pane, select Bundle > Diagnostics.
Click Bit Error Rate Tester.
Run your mouse over the MouseOver to Select a Port to Display bar.
A list of bundles configured on the CTP device appears.
In the table of bundles, select the bundle for which you want to configure a serial loop.
Configure the serial loop as described in Table 20.

Table 20: Serial Loop Parameter Settings in CTPView

Field	Function	Your Action
Serial Loop	Specifies the direction of the serial loop or removes the serial loop.	Select one: None—Removes the serial loop. To Net—Creates a loop toward the network. Data arriving from the IP network destined for the serial interface is looped back to the IP network and remote customer device. The data is still transmitted from the IP network to the serial interface, but data from the serial interface to the IP network and remote device is blocked. To I/F—Creates a loop toward the customer device attached to the serial interface. Data arriving from the serial interface that is destined for the IP network is looped back to the serial interface. The data is still transmitted from the serial interface to the IP network, but data from the IP network to the serial interface is blocked.

arrow_backward PREVIOUS

NEXT arrow_forward Using CESoPSN Bundles to Group DS0s on IP Circuits

footer-navigation