Displaying BERT Status and Counters for CESoPSN Bundles (CTPView)
This topic describes how to display BERT status and counters.
Before you begin:
Log in to the CTPView software at least at the Net_Admin level.
Connect the CTPView server to the CTP device for which you want to change the status of the bundles.
To view BERT status and counters:
- In the side pane, select Bundle > Diagnostics.
- Click Bit Error Rate Tester.
- Run your mouse over the MouseOver to Select
a Port to Display bar.
A list of bundles configured on the CTP device appears.
- In the table of bundles, select the bundle that you want
to view.
The BERT configuration and counters page appears. Table 1 describes the status and the counter fields.
Table 1: BERT Status and Counters in CTPView
Field Name | Field Description |
|---|---|
Sync or Lost | Shows whether the local CTP device is currently in sync with the remote device.
|
Error Free % | Percentage of time since BERT statistics were cleared that there were no errors. |
Error Cnt | Number of errors found since BERT statistics were cleared. |
Error Sec | Number of seconds during which there were errors. |
Sync Sec | Number of seconds that the local CTP device has been in sync with the remote CTP device. |
Availability% | Percentage of time since BERT statistics were cleared that the circuit has been available. |
Run Sec | Number of seconds the current update has been running. |
SLoss Cnt: | Number of times synchronization was lost. |
Last Clr | Time since the BERT counters were cleared. |