Navigation
Firefly Perimeter Factory Default Settings
Firefly Perimeter is a security device that requires these basic configuration settings to function:
- Interfaces must be assigned IP addresses.
- Interfaces must be bound to zones.
- Policies must be configured between zones to permit or deny traffic.
Firefly Perimeter has the following default configurations set when you power it on for the first time.
Table 1 lists the factory default settings for interfaces.
Table 1: Factory Default Settings for Interfaces
Interface | Security Zones | DHCP State |
|---|---|---|
ge-0/0/0 | untrust | client |
ge-0/0/1 | not configured | not configured |
Table 2 lists the factory default settings for the security policies.
Table 2: Factory Default Settings for Security Policies
Source Zone | Destination Zone | Policy Action |
|---|---|---|
trust | untrust | permit |
trust | trust | permit |
untrust | trust | deny |
