- play_arrow Junos OS Overview
- play_arrow Junos OS Overview
-
- play_arrow Install, Upgrade, or Downgrade for Junos OS Software
- play_arrow Junos OS Install and Upgrade Overview
- play_arrow Prepare for Installation and Upgrade
- play_arrow Upgrade to Junos OS with Upgraded FreeBSD
- play_arrow Install Software on Routers
- play_arrow Install Software on Switches
- Installing Software on EX Series Switches
- Configuring Dual-Root Partitions
- Troubleshooting Software Installation on EX Series Switches
- Troubleshooting a Switch That Has Booted from the Backup Junos OS Image
- Installing Software on QFX Series Devices (Junos OS)
- Installing and Recovering Software Using the Open Network Install Environment (ONIE)
- Personality Upgrade Process
- Upgrading the Personality of QFX10002-60C and PTX10002-60C Devices
- play_arrow Install Software on Firewalls
- play_arrow Manage YANG Packages During an Upgrade or Downgrade
-
- play_arrow System Backup and Recovery
- play_arrow Back Up an Installation
- play_arrow Recover Junos OS
-
- play_arrow Installing and Upgrading the BIOS and Firmware
- play_arrow For Routers
- play_arrow For Switches
- play_arrow For Firewalls
-
- play_arrow Zero Touch Provisioning and Secure Zero Touch Provisioning
- play_arrow Phone-Home Client
- play_arrow Automatic Installation of Configuration Files
- play_arrow Automatic Installation of Configuration Files
-
- play_arrow Configuration Statements and Operational Commands
- play_arrow Configuration Statements and Operational Commands
-
VM Host Operations and Management
With the virtualization of the Routing Engine, Junos
OS supports new request
and show
commands associated
with the host and hypervisor processes. The commands are related to:
Reboot, halt, and power management for the host.
Software upgrade for the host.
Disk snapshot for the host.
The following request
commands are not available
on the RE-MX-X6, RE-MX-X8, and RE-PTX-X8 Routing Engines:
request system power on
The following commands can be used only for the guest Junos OS:
You can use the following new request vmhost
commands
on the host OS:
request vmhost software abort in-service-upgrade
Note:This command is not supported on the QFX10002-60C and PTX10002-60C devices.
request vmhost software in-service-upgrade
Note:This command is not supported on the QFX10002-60C and PTX10002-60C devices.