close

keyboard_arrow_left

Table of Contents Expand all

list Table of Contents

English

chassis

date_range 10-Dec-24

arrow_backward

arrow_forward

Syntax

chassis {
    aggregated-devices {...}  
    alarm {...}
    alarm-port {...}
    ambient-temperature;
    auto-image-upgrade;
    auto-satellite-conversion;
    cb name {...}
    config-button (no-clear | no-rescue);
    container-devices {...}
    copy-tos-to-outer {...}
    craft-lockout;
    dedicated-ukern-cpu (BFD);
    disable-fm;
    disable-power-management;
    disk-partition {...}
    ecmp-alb {...}
    effective-shaping-rate;
    enhanced-policer;
    epacl-firewall-optimization;
    error {...}
    extended-statistics;
    fabric {...}
    forwarding-options {...}
    fpc name {...}
    fpc-empolicy-profile low-power-mode;
    fpc-ifl-ae-statistics;
    fpc-resync;
    fru-local-storage-disable;
    fru-poweron-sequence;
    host-outbound media-interface {...}
    icmp {...}
    icmp6 {...}
    input-firewall-optimized-profile;
    ioc-npc-connectivity {...} 
    ipvacl-firewall-l2-profile;
    iracl-firewall-ipv4-profile;
    ivacl-firewall-no-portrange-profile;
    jnu-management {...}
    lcc name {...}
    lcd-menu {...}
    limited-ifl-scaling;
    local-station-mac local-station-mac;
    loopback-firewall-optimization;
    loopback-firewallv6-optimization;
    maximum-ecmp;
    memory-enhanced {...}
    mode power-optimized;
    monitor-pem-inputs;
    multicast-loadbalance {...}
    network-services;
    network-slices {...}
    no-power-budget;
    no-psu-redundancy;
    nssu {...}
    onbox-av-load-flavor heavy;
    optics display-3po-pn;
    oss-map {...}
    p4rt node-id node-id;
    pem {...}
    pem {...}
    periodic {...}
    per-logical-interface-firewall;
    policer-drop-probability-low;
    policer-limit;
    power-off-ports-on-no-master-re (disable | enable);
    ppp-subscriber-services;
    preserve-fpc-poweron-sequence;
    provider-instance-devices device-count;
    pseudowire-service {...}
    psm {...}
    psu {...}
    realtime-ukern-thread (BFD);
    redundancy {...}   
    redundancy-group {...}
    resource-watch {...}
    route-localization {...}
    routing-engine {...}
    satellite satellite-name;
    serdes test-mode test-mode;
    sfm {...}
    sib;
    slow-pfe-alarm;
    synchronization {...}
    synchronization {...}
    synchronization {...}
    synchronization {...}
    turbotx-disable;
    usb {...}
    vrf-mtu-check;
}

Hierarchy Level

content_copy zoom_out_map
[edit]

Description

Configure router chassis properties.

Note:

Use Feature Explorer to confirm platform and release support for specific features.

Options

config-button

Config button behavior settings.

no-clear—Don't reset to factory-default configuration.
no-rescue—Don't reset to rescue configuration.

disable-fm

Disable Fabric Manager.

disable-power-management

Disable Power Management in this chassis.

fpc-empolicy-profile low-power-mode

(Only for MX10004 and MX10008 devices with LC9600 line card) Enable fpc-empolicy-profile low-power-mode.

fpc-ifl-ae-statistics

Enable fpc ifl ae child statistics.

fru-local-storage-disable

Disable and erase local storage on FPC. (FPC reboot required)

local-station-mac

Local station mac address configuration.

mode power-optimized

Set power mode to power-optimized.

monitor-pem-inputs

Enable low current usage monitoring.

no-psu-redundancy

Disable N+1 Redundancy for PSUs.

onbox-av-load-flavor heavy

(Only for SRX devices) Select onbox anti-virus traffic load flavor.

optics display-3po-pn

To display third party optics part number.

p4rt node-id

Chassis p4rt identifier.

Range: 1 through 18446744073709551615

per-logical-interface-firewall

Ingress port firewall can be supported per logical interface, restarts PFE.

policer-limit

Limit the policer tick unit to 32 bytes.

power-off-ports-on-no-master-re

Powering off ports if no master RE present.

disable—Disable powering off ports if no master RE present.
enable—Enable powering off ports if no master RE present.

provider-instance-devices

Number of provider instance port devices.

satellite satellite-name

Display JNU satellite configuration schema. Connected Security Distributed Services (CSDS) Architecture support this option.

serdes test-mode

Serdes test mode for link training.

turbotx-disable

Disable turbotx processing. Turbotx host path enables higher packets-per-second (pps) for certain junos applications. Only supported for Linux based line cards.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

satellite satellite-name option is added in Junos OS Release 24.4R1.

Statement introduced before Junos OS Release 7.4.

arrow_backward PREVIOUS charging-service-list

NEXT arrow_forward chassis-id (LLDP)

Junos CLI Reference

ON THIS PAGE