close
keyboard_arrow_left
Table of Contents
- play_arrow Weighted Random Early Detection (WRED) and Explicit Congestion Notification (ECN)
- play_arrow WRED and Drop Profiles
- play_arrow Explicit Congestion Notification (ECN)
-
- play_arrow CoS Queue Schedulers, Traffic Control Profiles, and Hierarchical Port Scheduling (ETS)
- play_arrow Queue Schedulers and Scheduling Priority
- Understanding Default CoS Scheduling and Classification
- Understanding CoS Scheduling Behavior and Configuration Considerations
- Understanding CoS Output Queue Schedulers
- Defining CoS Queue Schedulers
- Example: Configuring Queue Schedulers
- Defining CoS Queue Scheduling Priority
- Example: Configuring Queue Scheduling Priority
- Monitoring CoS Scheduler Maps
- play_arrow Port Scheduling and Shaping
- play_arrow Troubleshooting Egress Bandwidth Issues
- play_arrow Traffic Control Profiles and Priority Group Scheduling
- Understanding CoS Traffic Control Profiles
- Understanding CoS Priority Group Scheduling
- Understanding CoS Virtual Output Queues (VOQs)
- Defining CoS Traffic Control Profiles (Priority Group Scheduling)
- Example: Configuring Traffic Control Profiles (Priority Group Scheduling)
- Understanding CoS Priority Group and Queue Guaranteed Minimum Bandwidth
- Example: Configuring Minimum Guaranteed Output Bandwidth
- Understanding CoS Priority Group Shaping and Queue Shaping (Maximum Bandwidth)
- Example: Configuring Maximum Output Bandwidth
- play_arrow Hierarchical Port Scheduling (ETS)
-
- play_arrow Data Center Bridging and Lossless FCoE
- play_arrow Data Center Bridging
- Understanding DCB Features and Requirements
- Understanding DCBX
- Configuring the DCBX Mode
- Configuring DCBX Autonegotiation
- Understanding DCBX Application Protocol TLV Exchange
- Defining an Application for DCBX Application Protocol TLV Exchange
- Configuring an Application Map for DCBX Application Protocol TLV Exchange
- Applying an Application Map to an Interface for DCBX Application Protocol TLV Exchange
- Example: Configuring DCBX Application Protocol TLV Exchange
- play_arrow Lossless FCoE
- Example: Configuring CoS PFC for FCoE Traffic
- Example: Configuring CoS for FCoE Transit Switch Traffic Across an MC-LAG
- Example: Configuring CoS Using ELS for FCoE Transit Switch Traffic Across an MC-LAG
- Example: Configuring Lossless FCoE Traffic When the Converged Ethernet Network Does Not Use IEEE 802.1p Priority 3 for FCoE Traffic (FCoE Transit Switch)
- Example: Configuring Two or More Lossless FCoE Priorities on the Same FCoE Transit Switch Interface
- Example: Configuring Two or More Lossless FCoE IEEE 802.1p Priorities on Different FCoE Transit Switch Interfaces
- Example: Configuring Lossless IEEE 802.1p Priorities on Ethernet Interfaces for Multiple Applications (FCoE and iSCSI)
- Troubleshooting Dropped FCoE Traffic
-
- play_arrow CoS Buffers and the Shared Buffer Pool
- play_arrow CoS Buffers Overview
- play_arrow Shared Buffer Pool Examples
- Example: Recommended Configuration of the Shared Buffer Pool for Networks with Mostly Best-Effort Unicast Traffic
- Example: Recommended Configuration of the Shared Buffer Pool for Networks with Mostly Best-Effort Traffic on Links with Ethernet PAUSE Enabled
- Example: Recommended Configuration of the Shared Buffer Pool for Networks with Mostly Multicast Traffic
- Example: Recommended Configuration of the Shared Buffer Pool for Networks with Mostly Lossless Traffic
-
- play_arrow CoS on EVPN VXLANs
- play_arrow Configuration Statements and Operational Commands
list Table of Contents
Defining CoS Code-Point Aliases
date_range
19-Feb-21
You can use code-point aliases to streamline the process of configuring CoS features on your switch. A code-point alias assigns a name to a pattern of code-point bits. You can use this name instead of the bit pattern when you configure other CoS components such as classifiers and rewrite rules.
You can configure code-point aliases for the following CoS marker types:
DSCP or DSCP IPv6—Handles incoming IPv4 or IPv6 packets.
IEEE 802.1p—Handles Layer 2 frames.
To configure a code-point alias:
- Specify a CoS marker type (IEEE 802.1 or DSCP).
- Assign an alias.
- Specify the code point that corresponds to the alias.
content_copy zoom_out_map
[edit class-of-service code-point-aliases] user@switch# set (dscp | dscp-ipv6 | ieee-802.1) alias-name code-point-bits
For example, to configure a code-point alias for an IEEE 802.1 CoS marker type that has the alias name be2 and maps to the code-point bits 001:
content_copy zoom_out_map
[edit class-of-service code-point-aliases] user@switch# set ieee-802.1 be2 001
