Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

close

keyboard_arrow_left

Table of Contents Expand all

play_arrow Understanding Layer 2 Networking
- Layer 2 Networking
play_arrow Configuring MAC Addresses
- MAC Addresses
play_arrow Configuring MAC Learning
- MAC Learning
play_arrow Configuring MAC Accounting
- MAC Accounting
play_arrow Configuring MAC Notification
- MAC Notification
play_arrow Configuring MAC Table Aging
- MAC Table Aging
play_arrow Configuring Learning and Forwarding
- Layer 2 Forwarding Tables
play_arrow Configuring Bridging and VLANs
- Bridging and VLANs
play_arrow Configuring 802.1Q VLANs
- 802.1Q VLANs Overview
- 802.1Q VLAN IDs and Ethernet Interface Types
- Configuring Dynamic 802.1Q VLANs
- Enabling VLAN Tagging
- Configuring Tagged Interface with multiple tagged vlans and native vlan
- Sending Untagged Traffic Without VLAN ID to Remote End
- Configuring Tag Protocol IDs (TPIDs) on QFX Series Switches
- Configuring Flexible VLAN Tagging on PTX Series Packet Transport Routers
- Configuring an MPLS-Based VLAN CCC with Pop, Push, and Swap and Control Passthrough
- Binding VLAN IDs to Logical Interfaces
- Associating VLAN IDs to VLAN Demux Interfaces
- Configuring VLAN and Extended VLAN Encapsulation
- Configuring a Layer 2 VPN Routing Instance on a VLAN-Bundled Logical Interface
- Example: Configuring a Layer 2 VPN Routing Instance on a VLAN-Bundled Logical Interface
- Specifying the Interface Over Which VPN Traffic Travels to the CE Router
- Configuring Access Mode on a Logical Interface
- Configuring a Logical Interface for Trunk Mode
- Configuring the VLAN ID List for a Trunk Interface
- Configuring a Trunk Interface on a Bridge Network
- Configuring a VLAN-Bundled Logical Interface to Support a Layer 2 VPN Routing Instance
- Configuring a VLAN-Bundled Logical Interface to Support a Layer 2 VPN Routing Instance
- Configuring a Layer 2 Circuit on a VLAN-Bundled Logical Interface
- Example: Configuring a Layer 2 Circuit on a VLAN-Bundled Logical Interface
- Guidelines for Configuring VLAN ID List-Bundled Logical Interfaces That Connect CCCs
- Specifying the Interface to Handle Traffic for a CCC
- Specifying the Interface to Handle Traffic for a CCC Connected to the Layer 2 Circuit
play_arrow Configuring Static ARP Table Entries
- Static ARP Table Entries Overview
- Static ARP Entries on Ethernet Interfaces
- Configuring Static ARP Table Entries For Mapping IP Addresses to MAC Addresses
- Example: Configuring Static ARP Entries on Ethernet Interfaces
play_arrow Configuring Restricted and Unrestricted Proxy ARP
- Restricted and Unrestricted Proxy ARP Overview
- Configuring Restricted and Unrestricted Proxy ARP
play_arrow Configuring Gratuitous ARP
- Configuring Gratuitous ARP
play_arrow Adjusting the ARP Aging Timer
- Adjusting the ARP Aging Timer
play_arrow Configuring Tagged VLANs
- Configuring Tagged VLANs
play_arrow Stacking and Rewriting Gigabit Ethernet VLAN Tags
- Stacking and Rewriting Gigabit Ethernet VLAN Tags Overview
- Stacking and Rewriting Gigabit Ethernet VLAN Tags
- Configuring Frames with Particular TPIDs to Be Processed as Tagged Frames
- Configuring Tag Protocol IDs (TPIDs) on PTX Series Packet Transport Routers
- Configuring Stacked VLAN Tagging
- Configuring Dual VLAN Tags
- Configuring Inner and Outer TPIDs and VLAN IDs
- Stacking a VLAN Tag
- Stacking Two VLAN Tags
- Removing a VLAN Tag
- Removing the Outer and Inner VLAN Tags
- Removing the Outer VLAN Tag and Rewriting the Inner VLAN Tag
- Rewriting the VLAN Tag on Tagged Frames
- Rewriting a VLAN Tag on Untagged Frames
- Rewriting a VLAN Tag and Adding a New Tag
- Rewriting the Inner and Outer VLAN Tags
- Examples: Stacking and Rewriting Gigabit Ethernet IQ VLAN Tags
- Understanding Transparent Tag Operations and IEEE 802.1p Inheritance
- Understanding swap-by-poppush
- Configuring IEEE 802.1p Inheritance push and swap from the Transparent Tag
play_arrow Configuring Private VLANs
- Private VLANs
- Understanding Private VLANs
- Bridge Domains Setup in PVLANs on MX Series Routers
- Bridging Functions With PVLANs
- Flow of Frames on PVLAN Ports Overview
- Guidelines for Configuring PVLANs on MX Series Routers
- Configuring PVLANs on MX Series Routers in Enhanced LAN Mode
- Example: Configuring PVLANs with Secondary VLAN Trunk Ports and Promiscuous Access Ports on a QFX Series Switch
- IRB Interfaces in Private VLANs on MX Series Routers
- Guidelines for Configuring IRB Interfaces in PVLANs on MX Series Routers
- Forwarding of Packets Using IRB Interfaces in PVLANs
- Configuring IRB Interfaces in PVLAN Bridge Domains on MX Series Routers in Enhanced LAN Mode
- Example: Configuring an IRB Interface in a Private VLAN on a Single MX Series Router
play_arrow Configuring Layer 2 Bridging Interfaces
- Layer 2 Bridging Interfaces Overview
- Configuring Layer 2 Bridging Interfaces
- Example: Configuring the MAC Address of an IRB Interface
play_arrow Configuring Layer 2 Virtual Switch Instances
- Layer 2 Virtual Switch Instances
play_arrow Configuring Link Layer Discovery Protocol
- LLDP Overview
- Configuring LLDP
- Example: Configuring LLDP
- Configuring the Transmission of Maximum VLAN Name TLVs in LLDP
- LLDP Operational Mode Commands
- Tracing LLDP Operations
play_arrow Configuring Layer 2 Protocol Tunneling
- Layer 2 Protocol Tunneling (L2PT)
play_arrow Configuring Virtual Routing Instances
- Virtual Routing Instances
play_arrow Configuring Layer 3 Logical Interfaces
- Layer 3 Logical Interfaces
play_arrow Configuring Routed VLAN Interfaces
- Routed VLAN Interfaces
play_arrow Configuring Integrated Routing and Bridging
- Integrated Routing and Bridging
play_arrow Configuring VLANS and VPLS Routing Instances
- VLANs and VPLS Routing Instances
play_arrow Configuring Multiple VLAN Registration Protocol (MVRP)
- Multiple VLAN Registration Protocol
play_arrow Configuring Ethernet Ring Protection Switching
- Example: Configuring Ethernet Ring Protection Switching on EX Series Switches
- Example: Configuring Ethernet Ring Protection Switching on QFX Series and EX Series Switches Supporting ELS
play_arrow Configuring Q-in-Q Tunneling and VLAN Translation
- Configuring Q-in-Q Tunneling and VLAN Q-in-Q Tunneling and VLAN Translation
play_arrow Configuring Redundant Trunk Groups
- Redundant Trunk Groups
- Q-in-Q Support on Redundant Trunk Links Using LAGs with Link Protection
play_arrow Configuring Proxy ARP
- Proxy ARP
play_arrow Configuring Layer 2 Interfaces on Security Devices
- Layer 2 Interfaces on Security Devices
play_arrow Configuring Security Zones and Security Policies on Security Devices
- Security Zones and Security Policies on Security Devices
play_arrow Configuring Ethernet Port Switching Modes on Security Devices
- Ethernet Port Switching Modes on Security Devices
play_arrow Configuring Ethernet Port VLANs in Switching Mode on Security Devices
- Ethernet Port VLANs in Switching Mode on Security Devices
play_arrow Configuring Secure Wire on Security Devices
- Secure Wire on Security Devices
play_arrow Configuring Reflective Relay on Switches
- Reflective Relay on Switches
play_arrow Configuring Edge Virtual Bridging
- Edge Virtual Bridging
play_arrow Troubleshooting Ethernet Switching
- Troubleshooting Ethernet Switching
- Troubleshooting Ethernet Switching on EX Series Switches
play_arrow Configuration Statements and Operational Commands
- Junos CLI Reference Overview

list Table of Contents

English

keyboard_arrow_right

Removing a VLAN Tag

date_range 20-Dec-24

arrow_backward

arrow_forward

To remove a VLAN tag from all tagged frames entering or exiting the interface, include the pop statement in the input VLAN map or output VLAN map:

pop;

You can include this statement at the following hierarchy levels:

[edit interfaces interface-name unit logical-unit-number input-vlan-map]
[edit interfaces interface-name unit logical-unit-number output-vlan-map]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number input-vlan-map]
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number output-vlan-map]

arrow_backward PREVIOUS Stacking Two VLAN Tags

NEXT arrow_forward Removing the Outer and Inner VLAN Tags

footer-navigation