Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    show chassis cluster status

    Syntax

    show chassis cluster status <redundancy-group group-number >

    Release Information

    Command modified in Junos OS Release 9.2. Support for dual control ports added in Junos OS Release 10.0. Support for monitoring failures added in Junos OS Release 12.1X46-D20.

    Description

    Display the failover status of a chassis cluster.

    Options

    • none—Display the status of all redundancy groups in the chassis cluster.
    • redundancy-group group-number—(Optional) Display the status of the specified redundancy group.

    Required Privilege Level

    view

     

    Related Documentation

     

    List of Sample Output

    show chassis cluster status
    show chassis cluster status redundancy-group 2
    show chassis cluster status
    show chassis cluster status
    show chassis cluster status

    Output Fields

    Table 1 lists the output fields for the show chassis cluster status command. Output fields are listed in the approximate order in which they appear.

    Table 1: show chassis cluster status Output Fields

    Field Name

    Field Description

    Cluster ID

    ID number (1-15) of a cluster is applicable for releases upto 12.1X45-D10. ID number (1-255) is applicable for releases 12.1X45-D10 and later. Setting a cluster ID to 0 is equivalent to disabling a cluster.

    Redundancy-Group

    ID number (1-128) of a redundancy group in the chassis cluster.

    Node name

    Node (device) in the chassis cluster (node0 or node1).

    Priority

    Assigned priority for the redundancy group on that node.

    Status

    State of the redundancy group (Primary, Secondary, Lost, or Unavailable).

    • Primary—Redundancy group is active and passing traffic.
    • Secondary—Redundancy group is passive and not passing traffic.
    • Lost—Node loses contact with the other node through the control link. Most likely to occur when both nodes are in a cluster and due to control link failure, one node cannot exchange heartbeats, or when the other node is rebooted.
    • Unavailable—Node has not received a single heartbeat over the control link from the other node since the other node booted up. Most likely to occur when one node boots up before the other node, or if only one node is present in the cluster.

    Preempt

    • Yes: Mastership can be preempted based on priority.
    • No: Change in priority will not preempt the mastership.

    Manual failover

    • Yes: If the Mastership is set manually through the CLI with the request chassis cluster failover node or request chassis cluster failover redundancy-group command. This overrides Priority and Preempt.
    • No: Mastership is not set manually through the CLI.

    Sample Output

    show chassis cluster status

    user@host> show chassis cluster status 
    Cluster ID: 3 
   Node name               Priority    Status    Preempt  Manual failover
	Redundancy-group: 0, Failover count: 1
    node0                   254         primary   no       no
    node1                   2           secondary no       no
	Redundancy-group: 1, Failover count: 1    
    node0                   254         primary   no       no
    node1                   1           secondary no       no

    Sample Output

    show chassis cluster status redundancy-group 2

    user@host> show chassis cluster status redundancy-group 2 
    Cluster ID: 14 
   Node name          Priority    Status    Preempt  Manual failover
	Redundancy-Group: 2, Failover count: 1
    node0              50          secondary no       no  
    node1              100         primary   no       no

    Sample Output

    show chassis cluster status

    user@host> show chassis cluster status 
    Cluster ID: 15
Node                  Priority          Status    Preempt  Manual failover
Redundancy group: 0 , Failover count: 5
    node0                   200         primary        no       no
    node1                   0           lost           n/a      n/a
Redundancy group: 1 , Failover count: 41
    node0                   101         primary        no       no
    node1                   0           lost           n/a      n/a

    Sample Output

    show chassis cluster status

    user@host> show chassis cluster status 
    Cluster ID: 15
Node                  Priority          Status    Preempt  Manual failover
Redundancy group: 0 , Failover count: 5
    node0                   200         primary        no       no
    node1                   0           unavailable    n/a      n/a
Redundancy group: 1 , Failover count: 41
    node0                   101         primary        no       no
    node1                   0           unavailable    n/a      n/a

    Sample Output

    show chassis cluster status

    user@host> show chassis cluster status

    The following output is specific to monitoring failures.

    Monitor Failure codes:
    CS  Cold Sync monitoring        FL  Fabric connection down
    GR  GRES monitoring             HW  Hardware monitoring
    IF  Interface monitoring        IP  IP monitoring
    LB  Loopback monitoring         MB  Mbuf monitoring
    NH  Nexthop monitoring          NP  NPC monitoring              
    SP  SPU monitoring              SM  Schedule monitoring
 
Cluster ID: 3 
Node   Priority Status         Preempt Manual   Monitor-failures

Redundancy group: 0 , Failover count: 2
node0 0        secondary      no      no       FL             
node1 200      primary        no      no       None           

Redundancy group: 1 , Failover count: 6
node0 0        ineligible     no      no       FL             
node1 200      primary        no      no       None

    Published: 2014-07-18

    Previous Page Next Page