Navigation
Example: Setting the Timeout Value for GTPv2 Tunnels
This example shows how to set the timeout value for GTPv2 tunnels.
Requirements
No special configuration beyond device initialization is required before configuring this feature.
Overview
In this example, you set the tunnel timeout value to 40 hours for the GTPv2 inspection object named gtp2.
Configuration
Step-by-Step Procedure
To configure the GTPv2 tunnel timeout value:
- Specify the GTPv2 profile.[edit]user@host# set security gprs gtp profile gtp2
- Specify the timeout value.[edit]user@host# set security gprs gtp profile gtp2 timeout 40
- If you are done configuring the device, commit the configuration.[edit]user@host# commit
Verification
To verify the configuration is working properly, enter the show security gprs command.
