Navigation
Example: Removing R9 Information Elements from GTP Messages
This example shows how to remove R9 information elements from GTP messages.
Requirements
No special configuration beyond device initialization is required before configuring this feature.
Overview
In this example, you configure the Gp interface of the security device to remove newly added R9 IEs from the GTP message.
Configuration
Step-by-Step Procedure
To remove R9 information elements from GTP messages:
- Specify the GTP profile.[edit]user@host# set security gprs gtp profile gtp1
- Specify the information element.[edit]user@host# set security gprs gtp profile gtp1 remove-ie version v1 release R9
- If you are done configuring the device, commit the configuration.[edit]user@host# commit
Verification
To verify the configuration is working properly, enter the show security gprs command.
