Navigation
Related Documentation
- AX, SRX Series
- Understanding Management VLAN Support
- Additional Information
- WLAN Feature Guide for Security Devices
Example: Configuring the Management VLAN
This example shows how to configure the management VLAN ID for an access point.
Requirements
Before you begin, specify the MAC address of the access point being configured. See AX411 Access Point Configuration Overview.
Overview
In this example, you set the management VLAN ID to 123 for access point ap-1.
Configuration
GUI Step-by-Step Procedure
To configure the management VLAN:
- Select Configure>Wireless LAN>Settings.
- Under AP Name, select ap-1, then click Edit.
- In the Edit - Access Point window, select the Management tab.
- Next to Management VLAN ID, enter 123.
- Click OK.
Step-by-Step Procedure
To configure the management VLAN:
- Specify the WLAN access point and the management VLAN
ID.[edit]user@host# set wlan access-point ap-1 external system ports ethernet management-vlan 123
- If you are done configuring the device, commit the configuration.[edit]user@host# commit
Verification
To verify the configuration is working properly, enter the show wlan access-point ap-1 command.
Related Documentation
- AX, SRX Series
- Understanding Management VLAN Support
- Additional Information
- WLAN Feature Guide for Security Devices
Published: 2014-05-22
Related Documentation
- AX, SRX Series
- Understanding Management VLAN Support
- Additional Information
- WLAN Feature Guide for Security Devices
