TechLibrary

Navigation

Supported Platforms

SRX100, SRX110, SRX210, SRX220, SRX240, SRX550, SRX650

show wlan access-points

Syntax

show wlan access-points <ap-name> <detail> <virtual-access-points> <detail> <client-associations> <neighbors>

Release Information

Command introduced in Release 10.0 of Junos OS.

Description

Display information about the wireless LAN access points configured on the services gateway.

Options

none—Display the status of all access points on the services gateway.
ap-name—(Optional) Display information about a specific access point on the services gateway.
detail—(Optional) Display detailed information about a specific access point on the services gateway.
virtual-access-points—(Optional) Display information about the virtual access points configured on a specific access point on the services gateway.
detail—(Optional) Display detailed information about a specific virtual access point on the services gateway.
client-associations—(Optional) Display information about the client associations on a specific access point on the services gateway.
neighbors—(Optional) Display information about the neighbor access points, including the last beacon (receive) time with the most active neighbors displayed first, in descending order.

Required Privilege Level

view

Related Documentation

SRX Series
clear wlan access-point neighbors

Additional Information
WLAN Feature Guide for Security Devices

List of Sample Output

show wlan access-points
show wlan access-points wl-ap8
show wlan access-points wl-ap8 detail
show wlan access-points wl-ap8 virtual-access-points
show wlan access-points wl-ap8 virtual-access-points detail
show wlan access-points wl-ap8 neighbors

Output Fields

Table 1 lists the output fields for the show wlan access-points command. Output fields are listed in the approximate order in which they appear.

Table 1: show wlan access-points Output Fields

Field Name	Field Description
Access-Point	Name of the access point.
Type	Access point type, for example “Ext” for external access point.
Interface	Interface on the SRX Series device to which the access point is connected.
Radio-mode/Channel	Physical Layer (PHY) standard mode of the radio and the channel used for transmitting and receiving.

Sample Output

show wlan access-points

user@host> show wlan access-points

Active access points information


Access-Point   Type   Interface    Radio-mode/Channel
wl-ap8         Ext    vlan.0       an/44, bgn/4
wl-ap6         Ext    vlan.0       an/149, bgn/4

show wlan access-points wl-ap8

user@host> show wlan access-points wl-ap8

Active access point information

Access Point        : wl-ap8
Type                : External
Access Interface    : vlan.0
IPv4 Address        : 40.0.0.70
Management Status   : Managed
Packet Capture      : Off
Radio1              : Mode: IEEE 802.11a/n, Channel: 44 (5220 MHz)
Radio2              : Mode: IEEE 802.11b/g/n, Channel: 4 (2427 MHz

show wlan access-points wl-ap8 detail

user@host> show wlan access-points wl-ap8 detail

Active access point detail information

Access Point          : wl-ap8
Type                  : External
Location              : Default Location
Serial Number         : BE2610AF0019
Firmware Version      : 10.1.3.7
Alternate Version     : 10.1.3.7
Regulatory Domain     : FCC
Country               : UNDEFINED
Access Interface      : vlan.0
Packet Capture        : Off
Ethernet Port:
    MAC Address       : 80:71:1F:3D:C5:00
    IPv4 Address      : 40.0.0.70
Radio1:
    Status            : On
    MAC Address       : 80:71:1F:3D:C5:00
    Mode              : IEEE 802.11a/n
    Channel           : 44 (5220 MHz)
Radio2:
    Status            : On
    MAC Address       : 80:71:1F:3D:C5:10
    Mode              : IEEE 802.11b/g/n
    Channel           : 4 (2427 MHz)

show wlan access-points wl-ap8 virtual-access-points

user@host> show wlan access-points wl-ap8 virtual-access-points

Virtual access points information

Access point name         : wl-ap8
Radio1:
  VAP0:
    SSID                  : wl-ap8vap0
    MAC Address           : 80:71:1F:3D:C5:00
    VLAN ID               : 1
    Traffic Statistics    :
      Input Bytes         : 0
      Output Bytes        : 722
      Input Packets       : 0
      Output Packets      : 6
Radio2:
  VAP0:
    SSID                  : wl-ap8vap0-rad2
    MAC Address           : 80:71:1F:3D:C5:10
    VLAN ID               : 1
    Traffic Statistics    :
      Input Bytes         : 0
      Output Bytes        : 497
      Input Packets       : 0
      Output Packets      : 5

show wlan access-points wl-ap8 virtual-access-points detail

user@host> show wlan access-points wl-ap8 virtual-access-points
detail

Virtual access points information

Access point name           : wl-ap8
Radio1:
  VAP0:
    SSID                    : wl-ap8vap0
    MAC Address             : 80:71:1F:3D:C5:00
    VLAN ID                 : 1
    VAP SECURITY            : wpa-personal
    Wpaversion              :
     Wpa2                   : Enable
     Wpa                    : Disable
    Ciper-Suites            :
     Ccmp(AES)              : Enable
     Tkpi                   : Disable
     Broadcast-Refresh-Rate : 0
Radio2:
  VAP0:
    SSID                    : wl-ap8vap0-rad2
    MAC Address             : 80:71:1F:3D:C5:10
    VLAN ID                 : 1
    VAP SECURITY            : wpa-personal
    Wpaversion              :
     Wpa2                   : Enable
     Wpa                    : Disable
    Ciper-Suites            :
     Ccmp(AES)              : Enable
     Tkpi                   : Disable
     Broadcast-Refresh-Rate : 0

show wlan access-points wl-ap8 neighbors

user@host> show wlan access-points w1-ap8 neighbors

Access point neighbors information

Access point: wl-ap8
MAC                Sec/WPA  Band/Chan/Sig  Last Beacon      SSID
80:71:1f:3d:f7:90  On/Off   2.4/4/-3       Jul 31 14:24:10  wl-ap6vap0-rad2
80:71:1f:3d:db:00  On/Off   5/44/-36       Jul 31 14:16:41  juniper-default

Published: 2014-05-22

Supported Platforms

SRX100, SRX110, SRX210, SRX220, SRX240, SRX550, SRX650