Factory-Default Configuration
Table 1 lists the default configuration of the AX411 Access Point provided by Juniper Networks.
Table 1: AX411 Access Point Factory-Default Configuration
Configurable Setting | Default Value |
|---|---|
Access point name | (Automatically generated) |
| Network Settings | |
IP address | Provided by DHCP server on the SRX Series device. |
Management VLAN ID | 1 |
Untagged VLAN ID | 1 |
| Country Code/ Regulatory Domain Settings | |
Country code | Based on product SKU |
Broadcast of country code in access point beacons and probe responses (IEEE 802.11d world mode) | Enabled |
| Virtual Access Point Settings | |
Virtual access point 0 on radio 1 and radio 2 | SSID: juniper-default VLAN ID: 1 Security: WPA2-Personal Encapsulation: AES Key: juniper-wireless Broadcast SSID: yes MAC authentication type: none |
| Radio Settings | |
Radio 1: | State: on IEEE 802.11 mode: 802.11a/n 802.11a/n channel: auto Channel bandwidth: 40 MHz |
Radio 2: | State: on IEEE 802.11 mode: 802.11b/g/n 802.11b/g/n channel: auto Channel bandwidth: 20 MHz |
Radios 1 and 2: | Primary channel: lower Protection: auto Maximum number of clients: 200 Transmit power: 100 percent Supported IEEE rate sets:
Basic IEEE rate sets:
Broadcast/multicast rate limiting: disabled Fixed multicast rate: auto Beacon interval: 100 DTIM period: 2 Fragmentation threshold: 2346 RTS threshold: 2347 |
| Quality of Service | |
WMM | Enabled |
