Related Documentation
Pinging RSVP-Signaled LSPs and LDP-Signaled LSPs
Enter the ping mpls command with the following syntax:
Table 1 describes the ping mpls command options.
Table 1: CLI ping mpls ldp and ping mpls lsp-end-point Command Options
Option | Description |
|---|---|
ldp fec | Pings an LDP-signaled LSP identified by the forwarding equivalence class (FEC) prefix and length. |
lsp-end-point prefix-name | Pings an LSP endpoint using either an LDP FEC or a RSVP LSP endpoint address. |
rsvp lsp-name | Pings an RSVP-signaled LSP identified by the specified LSP name. |
exp forwarding-class | (Optional) Specifies the value of the forwarding class to be used in the MPLS ping packets. |
countnumber | (Optional) Limits the number of ping requests to send. Specify a count from 0 through 1,000,000. The default value is 5. If you do not specify a count, ping requests are continuously sent until you press Ctrl-C. |
source source-address | (Optional) Uses the source address that you specify, in the ping request packet. |
detail | (Optional) Displays detailed output about the echo requests sent and received. Detailed output includes the MPLS labels used for each request and the return codes for each request. |
To quit the ping mpls command, press Ctrl-C.
The following is sample output from a ping mpls command:
!!xxx --- lsping statistics --- 5 packets transmitted, 2 packets received, 60% packet loss 3 packets received with error status, not counted as received.
The fields in the display are the same as those displayed by the J-Web ping MPLS diagnostic tool.
