Supported Platforms
show class-of-service congestion-notification
Syntax
Release Information
Command introduced in Junos OS Release 11.1 for the QFX Series.
Description
Display whether priority-based flow control (PFC) is enabled for each IEEE 802.1p code point.
Options
none | — | Display PFC state for all IEEE 802.1p code points. |
Required Privilege Level
view
Output Fields
Table 1 describes the output fields for the show class-of-service congestion-notification command. Output fields are listed in the approximate order in which they appear.
Table 1: show class-of-service congestion-notification Output Fields
Field Name | Field Description |
|---|---|
Type | Type of interfaces on which congestion notification is applied. Congestion notification is applied on input interfaces. |
Name | Name of the congestion notification profile. |
Index | Index of this congestion notification profile. |
Priority | IEEE 802.1p code point. |
PFC | State of PFC for the corresponding code point, either enabled or disabled. |
Sample Output
show class-of-service congestion-notification
user@switch> show class-of-service congestion-notification Type: Input, Name: fcoe_cnp, Index: 60305 Priority PFC 000 Disabled 001 Disabled 010 Disabled 011 Enabled 100 Disabled 101 Disabled 110 Disabled 111 Disabled Type: Input, Name: cnp2, Index: 60306 Priority PFC 000 Disabled 001 Disabled 010 Disabled 011 Enabled 100 Disabled 101 Disabled 110 Disabled 111 Enabled
