Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

[edit protocols isis] Configuration Statement Hierarchy on EX Series Switches

This topic lists supported and unsupported configuration statements in the [edit protocols isis] hierarchy level on EX Series switches.

  • Supported statements are those that you can use to configure some aspect of a software feature on the switch.
  • Unsupported statements are those that appear in the command-line interface (CLI) on the switch, but that have no effect on switch operation if you configure them.
  • Not all features are supported on all switch platforms. For detailed information about feature support on specific EX Series switch platforms, see EX Series Switch Software Features Overview.

This topic lists:

Supported Statements in the [edit protocols isis] Hierarchy Level

The following hierarchy shows the [edit protocols isis] configuration statements supported on EX Series switches.

protocols {isis {disable;export [ policy-names ];graceful-restart {disable;helper-disable;restart-duration seconds;}ignore-attached-bit;interface interface-name {bfd-liveness-detection {authentication {algorithm (keyed-md5 | keyed-sha-1 | meticulous-keyed-md5 | meticulous-keyed-sha-1 | simple-password);loose-check;}detection-time {threshold milliseconds;}minimum-interval milliseconds;minimum-receive-interval milliseconds;multiplier number;no-adaptation;transmit-interval {minimum-interval milliseconds;threshold milliseconds;}version (0 |1 | automatic);}checksum;csnp-interval (seconds | disable);disable;hello-padding (adaptive | loose | strict);disable;}level (1 | 2) {disable;hello-authentication-key key;hello-authentication-key-chain;hello-authentication-type authentication;hello-interval seconds;hold-time seconds;ipv4-multicast-metric number;ipv6-multicast-metric number;ipv6-unicast-metric number;metric metric;passive;priority number;}link-protection;mesh-group (value | blocked);no-adjacency-down-notification;no-eligible-backup;no-ipv4-multicast;no-ipv6-multicast;no-ipv6-unicast;no-unicast-topology;node-link-protection;passive;point-to-point;}level (1 | 2) {authentication-key key;authentication-type authentication;disable;external-preference preference;no-csnp-authentication;no-hello-authentication;no-psnp-authentication;preference preference;prefix-export-limit number;wide-metrics-only;}loose-authentication-check;max-areas number;no-adjacency-holddown;no-authentication-check;no-ipv4-routing;no-ipv6-routing;overload {advertise-high-metrics;allow-route-leaking;timeout seconds;}reference-bandwidth reference-bandwidth;rib-group {inet group-name;inet6 group-name;}spf-options {delay milliseconds;holddown milliseconds;rapid-runs number;}topologies {ipv4-multicast;ipv6-multicast;ipv6-unicast;}traceoptions {file filename <files number> <size maximum-file-size> <world-readable | no-world-readable>;flag flag <flag-modifier> <disable>;}}}

Unsupported Statements in the [edit protocols isis] Hierarchy Level

All statements in the [edit protocols isis] hierarchy level that are displayed in the command-line interface (CLI) on the switch are supported on the switch and operate as documented with the following exceptions:

Table 1: Unsupported [edit protocols isis] Configuration Statements on EX Series Switches

Statement

Hierarchy

Note: Variables, such as filename, are not shown in the statements or hierarchies.

authentication-key-chain

[edit protocols isis level<1 | 2>]

lsp-interval

[edit protocols isis interface]

lsp-lifetime

[edit protocols isis]

key-chain

[edit protocols isis interface bfd-liveness-detection authentication]

 

Related Documentation

 

Published: 2012-12-10

Supported Platforms

 

Related Documentation

 

Published: 2012-12-10

Previous Page Next Page