show bgp bmp
Syntax
Release Information
Command introduced in Junos OS Release 9.5.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Description
Display information about the BGP Monitoring Protocol (BMP).
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show bgp bmpOutput Fields
Table 1 lists the output fields for the show bgp bmp command. Output fields are listed in the approximate order in which they appear.
Table 1: show bgp bmp Output Fields
Field Name | Field Description |
|---|---|
BMP station address/port | IP address and port number of the monitoring station to which BGP Monitoring Protocol (BMP) statistics are sent. |
BMP session state | Status of the BMP session: UP or DOWN. |
Memory consumed by BMP | Memory used by the active BMP session. |
Statistics timeout | Amount of time, in seconds, between transmissions of BMP data to the monitoring station. |
Memory limit | Threshold, in bytes, at which the routing device stops collecting BMP data. |
Memory-connect retry timeout | Amount of time, in seconds, after which the routing device attempts to resume a BMP session that was ended after the configured memory threshold was exceeded. |
Sample Output
show bgp bmp
user@host> show bgp bmpBMP station address/port: 172.24.24.157+5454 BMP session state: DOWN Memory consumed by BMP: 0 Statistics timeout: 15 Memory limit: 10485760 Memory connect retry timeout: 600
