Supported Platforms
show chassis environment cip
Syntax (TX Matrix Plus Router)
Release Information
Command introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Description
(TX Matrix Plus router only) Display environmental information about the Connector Interface Panel (CIP).
Options
none | — | Display environmental information about all the CIP. |
slot | — | Display environmental information about a specific CIP. Replace slot with a value from 0 through 1. |
Required Privilege Level
view
List of Sample Output
Output Fields
Table 1 lists the output fields for the show chassis environment cip command. Output fields are listed in the approximate order in which they appear.
Table 1: show chassis environment cip Output Fields
Field Name | Field Description |
|---|---|
State | State of the CIP:
|
Temp | Temperature of the CIP in Celsius (C) and Fahrenheit (F). |
Power | Information about the voltage supplied to the CIP. The left column displays the required power, in volts. The right column displays the measured power, in millivolts. |
Bus Revision | Bus revision number. |
show chassis environment cip (TX Matrix Plus Router)
user@host> show chassis environment cipCIP 0 status:
State Online Active
Temperature 23 degrees C / 73 degrees F
Power 1
1.0 V 1015 mV
1.8 V 1817 mV
2.5 V 2497 mV
3.3 V 3325 mV
3.3 V bias 3300 mV
5.0 V 5001 mV
9.0 V 9049 mV
Bus Revision 74
CIP 1 status:
State Online Inactive
Temperature 24 degrees C / 75 degrees F
Power 1
1.0 V 1008 mV
1.8 V 1820 mV
2.5 V 2504 mV
3.3 V 3325 mV
3.3 V bias 3306 mV
5.0 V 5091 mV
9.0 V 9049 mV
Bus Revision 74
