Supported Platforms
Related Documentation
show chassis redundant-power-system
Syntax
Release Information
Command introduced in Junos OS Release 12.1 for EX Series switches.
Description
Display information about the Redundant Power Systems (RPS) connected to the switch.
Required Privilege Level
view
Related Documentation
List of Sample Output
show chassis redundant-power-system (Standalone Switch)show chassis redundant-power-system (Virtual Chassis member)
Output Fields
Table 1 lists the output fields for the show chassis redundant-power-system command. Output fields are listed in the approximate order in which they appear.
Table 1: show chassis redundant-power-system Output Fields
Field Name | Field Description | Level of Output |
|---|---|---|
Member | Member number of the switch connected to the RPS—For a switch that has never been configured in a Virtual Chassis, the value is always zero. For a Virtual Chassis member, the range is zero through the maximum number of members in the Virtual Chassis. | All levels |
Status | Status of the RPS:
| All levels |
RPS | Serial number of the RPS. | |
Port | Number of the switch connector on the RPS that is connected to a switch. | All levels |
Sample Output
show chassis redundant-power-system (Standalone Switch)
user@switch> show chassis redundant-power-system Member Status RPS Port 0 Armed CG0209121807 0
show chassis redundant-power-system (Virtual Chassis member)
user@switch> show chassis redundant-power-system Member Status RPS Port 0 Armed CG0209121814 5 2 Armed CG0209121815 4
