show ipv6 neighbors
Syntax
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.3 for EX Series switches.
Command introduced in Junos OS Release 12.2 for the QFX Series.
Description
Display information about the IPv6 neighbor cache.
Options
This command has no options.
Required Privilege Level
view
List of Sample Output
show ipv6 neighborsOutput Fields
Table 1 describes the output fields for the show ipv6 neighbors command. Output fields are listed in the approximate order in which they appear.
Table 1: show ipv6 neighbors Output Fields
Field Name | Field Description |
|---|---|
IPv6 Address | Name of the IPv6 interface. |
Linklayer Address | Link-layer address. |
State | State of the link: up, down, incomplete, reachable, stale, or unreachable. |
Exp | Number of seconds until the entry expires. |
Rtr | Whether the neighbor is a routing device: yes or no. |
Secure | Whether this entry was created using the Secure Neighbor Discovery (SEND) protocol: yes or no. |
Interface | Name of the interface. |
Sample Output
show ipv6 neighbors
user@host> show ipv6 neighbors IPv6 Address Linklayer Address State Exp Rtr Secure Interface 2001:db8:0:1:2a0:a514:0:24c 00:05:85:8f:c8:bd stale 546 yes no fe-1/2/0.1 fe80::2a0:a514:0:24c 00:05:85:8f:c8:bd stale 258 yes no fe-1/2/0.1 fe80::2a0:a514:0:64c 00:05:85:8f:c8:bd stale 111 yes no fe-1/2/1.5 fe80::2a0:a514:0:a4c 00:05:85:8f:c8:bd stale 327 yes no fe-1/2/2.9
