show mpls diffserv-te
List of Syntax
SyntaxSyntax (EX Series Switches)
Syntax
Syntax (EX Series Switches)
Release Information
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Statement introduced in Junos OS Release 12.3X50 for the QFX Series.
Description
Display Multiprotocol Label Switching (MPLS) label-switched path (LSP) Differentiated Services (DiffServ) class and preemption priority information.
Options
none | — | Display DiffServ classes and priorities used by MPLS LSPs. |
logical-system (all | logical-system-name) | — | (Optional) Perform this operation on all logical systems or on a particular logical system. |
Required Privilege Level
view
List of Sample Output
show mpls diffserv-teOutput Fields
Table 1 describes the output fields for the show mpls diffserv-te command. Output fields are listed in the approximate order in which they appear.
Table 1: show mpls diffserv-te Output Fields
Field Name | Field Description |
|---|---|
Bandwidth model | Bandwidth constraint model supported. The maximum allocation model (MAM) for EXP-inferred LSPs (E-LSPs) is currently supported. |
TE class | DiffServ traffic engineering class. |
Traffic class | MPLS class type that corresponds to the DiffServ traffic engineering class:
|
Priority | MPLS preemption priority for this class type, a value from 0 through 7. Interior gateway protocols (IGPs) distribute information about the available bandwidth for each traffic engineering class. |
Sample Output
show mpls diffserv-te
user@host> show mpls diffserv-teBandwidth model: Maximum Allocation Model with support for E-LSPs. TE class Traffic class Priority te0 ct0 3 te1 ct1 2
