Supported Platforms
show network-access gx-plus
Syntax
Release Information
Command introduced in Junos OS Release 11.2.
Description
Display Gx-Plus provisioning state, synchronization state, and statistics information.
Options
state | — | (Optional) Display Gx-Plus provisioning state. |
statistics | — | (Optional) Display Gx-Plus statistics. |
sync-state | — | (Optional) Display Gx-Plus synchronization state. |
Required Privilege Level
view
List of Sample Output
show network-access gx-plus stateshow network-access gx-plus statistics
show network-access gx-plus sync-state
Output Fields
Table 1 lists the output fields for the show network-access gx-plus command. Output fields are listed in the approximate order in which they appear.
Table 1: show network-access gx-plus Output Fields
Field Name | Field Description |
|---|---|
Gx-plus state | State of the Gx-Plus application, including the following:
|
Sync-Event | Type of synchronization event. |
Timeout | Number of times notification sent without response. |
Gx-plus general counters | Number and state of general events. |
Gx-plus sync-event counters | Number and state of synchronization events. |
Sample Output
show network-access gx-plus state
user@host> show network-access gx-plus stateGx-plus state: Engine created : yes Partition configured : yes Configuration active : yes Diameter interface configured : yes Total number of entries : 0 Number of pending entries : 0 Number of pending logouts : 0
show network-access gx-plus statistics
user@host> show network-access gx-plus statisticsGx-plus general counters: Counter Value engine created 1 initial config: active 1 recovery: process restart 1 diameter-app initial config: success 1 Gx-plus sync-event counters: Category Counter Value warm-boot activated 1 warm-boot posted 1 warm-boot response 1 awd posted 12 awd response 12
show network-access gx-plus sync-state
user@host> show network-access gx-plus sync-stateGx-plus sync-events: Sync-Event Timeout cold-boot 6100
