Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- Configuring a Maintenance Endpoint
- ACX, M, MX, PTX, T Series
- IEEE 802.1ag OAM Connectivity Fault Management Overview
- EX, MX Series
- Example: Configuring Connectivity Fault Management for a PBB Network
direction
Syntax
direction (up | down);
Hierarchy Level
[edit protocols oam ethernet connectivity-fault-management maintenance-domain domain-name maintenance-association ma-name mep mep-id]
Release Information
Statement introduced in Junos OS Release 8.4.
Description
Configure the direction of the MEP.
Options
up—An UP MEP CCM is transmitted out of every logical interface which is part of the same bridging or vpls instance except for the interface configured on this MEP.
![]() | Note: The up direction for MEP is not supported on T Series routers. |
down—Down MEP CCMs are transmitted only out the interface configured on this MEP.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, T Series
- Configuring a Maintenance Endpoint
- ACX, M, MX, PTX, T Series
- IEEE 802.1ag OAM Connectivity Fault Management Overview
- EX, MX Series
- Example: Configuring Connectivity Fault Management for a PBB Network
Published: 2013-04-03
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- Configuring a Maintenance Endpoint
- ACX, M, MX, PTX, T Series
- IEEE 802.1ag OAM Connectivity Fault Management Overview
- EX, MX Series
- Example: Configuring Connectivity Fault Management for a PBB Network